Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: EML & Rev counter  (Read 1361 times)

0 Members and 1 Guest are viewing this topic.

Glassback

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield, South Yorkshire
  • Posts: 134
    • Face lift cdx dti
    • View Profile
EML & Rev counter
« on: 07 February 2011, 10:17:57 »
Hi, The EML. came on today followed by a loss of power, also noticed the rev counter was not counting. I turned off the ignition for a around Twenty seconds, then back on again but still the same. Can any one tell me what's going on??
Nearly forgot,  car is 2.2 dti cdx 2001reg.
« Last Edit: 07 February 2011, 11:00:11 by Colin_Saunders »
Logged

Hannah Judes Dad

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Cleethorpes North East Lincs
  • Posts: 1933
    • the misses round the bend
    • View Profile
Re: EML & Rev counter
« Reply #1 on: 07 February 2011, 12:30:57 »
If you look in the maintenance guide there is a thread of how to read the fault code that has happened, once you have found out what the fault code is post it up and someone should be able to help you out.

Here's the link

http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
« Last Edit: 07 February 2011, 12:31:36 by hannahjudesdad »
Logged
Don't wee on the electric fence

Glassback

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield, South Yorkshire
  • Posts: 134
    • Face lift cdx dti
    • View Profile
Re: EML & Rev counter
« Reply #2 on: 07 February 2011, 14:15:54 »
Quote
If you look in the maintenance guide there is a thread of how to read the fault code that has happened, once you have found out what the fault code is post it up and someone should be able to help you out.

Here's the link

http://www.omegaowners.com/forum/YaBB.pl?num=1189022687


Hi Hanna judes dad.
The paper clip test and pedal trick won't work with 2.2 diesel, I need some one with a code reader.
Logged

MutantCav

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Gainsborough
  • Posts: 2716
  • Smoke me a kipper - I'll be back for Breakfast
    • View Profile
    • Free Giffgaff Sim With £5 Free Credit
Re: EML & Rev counter
« Reply #3 on: 07 February 2011, 14:44:23 »
I can read the codes for you mate but I'm about 40 mins away...
Logged
http://giffgaff.com/orders/affiliate/tvpromo Get a free giffgaff sim running on O2 network
£5 free credit on first top-up
£5 gives you 60 mins, 300 texts & unltd calls and texts to anyone else on giffgaff

Hannah Judes Dad

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Cleethorpes North East Lincs
  • Posts: 1933
    • the misses round the bend
    • View Profile
Re: EML & Rev counter
« Reply #4 on: 07 February 2011, 16:12:29 »
Sorry I was having a senior moment earlier and forgot about dti engines,I saw 2.2 and thought petrol not diesel.
I am a numpty sorry once again. :-[
I hope you can get your codes read,Chris (Mutant Cav) is not too far away from you although there may be someone closer to hand.
Logged
Don't wee on the electric fence

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34018
  • Git!
    • View Profile
Re: EML & Rev counter
« Reply #5 on: 07 February 2011, 16:14:24 »
Crank sensor is the likely cause.....
Logged

Brikhead

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • West-Mids.
  • Posts: 1540
  • Sleeping. Do not disturb.
    • 2003 chitroen Saxo
    • View Profile
Re: EML & Rev counter
« Reply #6 on: 07 February 2011, 18:12:45 »
As said, probably crank sensor, 2.2 dieseasal uses the crank sensor to supply the signal for the rev counter.
Best to buy original quality parts, cheap ones can cause problems...
Logged

Glassback

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield, South Yorkshire
  • Posts: 134
    • Face lift cdx dti
    • View Profile
Re: EML & Rev counter
« Reply #7 on: 07 February 2011, 19:03:33 »
Quote
As said, probably crank sensor, 2.2 dieseasal uses the crank sensor to supply the signal for the rev counter.
Best to buy original quality parts, cheap ones can cause problems...

Many thanks for all your help.
I was going to ask if the crank sensor fed the rev counter, but Mr. Brikhead has answered the question before it was asked. Many thanks ..Colin..
OOPs nearly forgot !  Where is the crank sensor on the 2.2 dti cdx 2001 Reg?
« Last Edit: 07 February 2011, 19:04:50 by Colin_Saunders »
Logged

Brikhead

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • West-Mids.
  • Posts: 1540
  • Sleeping. Do not disturb.
    • 2003 chitroen Saxo
    • View Profile
Re: EML & Rev counter
« Reply #8 on: 07 February 2011, 20:43:17 »
Quote
Many thanks for all your help.
I was going to ask if the crank sensor fed the rev counter, but Mr. Brikhead has answered the question before it was asked.

No need for such formality, Colin, Brik'll do fine!

From memory of my old Vectra the crank sensor is bolted to the front of the block (or side in your case) just above the sump line. The wiring loom then ran up to a connector mounted near the oil filter housing so you could look for that then follow the wires back to the sensor.
Logged

Glassback

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield, South Yorkshire
  • Posts: 134
    • Face lift cdx dti
    • View Profile
Re: EML & Rev counter
« Reply #9 on: 08 February 2011, 15:47:54 »
Quote
Quote
Many thanks for all your help.
I was going to ask if the crank sensor fed the rev counter, but Mr. Brikhead has answered the question before it was asked.

No need for such formality, Colin, Brik'll do fine!

From memory of my old Vectra the crank sensor is bolted to the front of the block (or side in your case) just above the sump line. The wiring loom then ran up to a connector mounted near the oil filter housing so you could look for that then follow the wires back to the sensor.


Just replaced the crank sensor following the guide in the maintenance section, 20 min job,  thanks to the guide. Just remains to road test now, Wish me luck.  :y
Logged

Glassback

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Sheffield, South Yorkshire
  • Posts: 134
    • Face lift cdx dti
    • View Profile
Re: EML & Rev counter
« Reply #10 on: 09 February 2011, 10:22:20 »
Quote
Crank sensor is the likely cause.....

Spot on mate.
Job done,  all ok now.
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.015 seconds with 17 queries.