Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2 3  All   Go Down

Author Topic: How Hard Is It To Change Front Wheel Bearings?????  (Read 3116 times)

0 Members and 1 Guest are viewing this topic.

Jim

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 3176
    • Irmscher 3.2 V6 Elite
    • View Profile
    • My Vauxhall Omega's
How Hard Is It To Change Front Wheel Bearings?????
« on: 24 February 2011, 17:53:38 »
As header how hard is it to change the bearing on the front hubs, I have the chance to get some good second hand hubs (pic below)

Logged
Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

feeutfo

  • Guest
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #1 on: 24 February 2011, 17:57:26 »
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that ist easy enougj to do on the front.
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #2 on: 24 February 2011, 18:07:12 »
Guide in "maintenance"
Wheel off, remove dustcap, wheel back on & lower. 32mm socket & breaker bar on hub nut (320Nm).
Remove both caliper bolts (13mm & 17mm). Remove pads, tie caliper out of the way.
Remove hub carrier bolts (18mm) & disc retaining screw (5mm allen key) & remove disc.
Remove hub assembly (might need whacking)
Fit new hub onto shaft & using 32mm socket on the INNER track, drive hub "home" & fit new nut.
Re-fit disc, caliper etc. (not the dust cap)
Re-fit wheel & lower & torque nut to 320Nm.
Remove wheel & refit dust cap.
Refit wheel......job done.
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Jim

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 3176
    • Irmscher 3.2 V6 Elite
    • View Profile
    • My Vauxhall Omega's
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #3 on: 24 February 2011, 18:07:33 »
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
Logged
Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #4 on: 24 February 2011, 18:08:27 »
Quote
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
As my post
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Jim

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 3176
    • Irmscher 3.2 V6 Elite
    • View Profile
    • My Vauxhall Omega's
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #5 on: 24 February 2011, 18:20:14 »
Quote
Quote
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
As my post
Cheers Rob, I posted the same time as you posted yours, The guide in the Maintence section isn't working I can't see anything in it, No pics or words
Logged
Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #6 on: 24 February 2011, 18:21:38 »
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

feeutfo

  • Guest
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #7 on: 24 February 2011, 18:22:20 »
Quote
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
If you swap hubs assembly as pictured with baring assembly attached you'll need to re set the camber. Better to remove the baring assembly by undoing the 320 mill nut and swap just those... Unless theres a problem with the hub assembly?.

There is some possible confussion with terminology here.
Baring is pressed in to the metal flange bit the wheels bolt to. It comes as one bit, so thats the baring in its own assembly imo.

Thats bolted to what i call the hub assembly and holds the caliper/wheel and baring/shock in place...

To swap, the shock has to be removed and therefor the camber setting will be lost.


Hope i've described that clearly  :-/ 
Logged

Jim

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 3176
    • Irmscher 3.2 V6 Elite
    • View Profile
    • My Vauxhall Omega's
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #8 on: 24 February 2011, 18:23:14 »
Quote
Try this http://www.omegaowners.com/forum/YaBB.pl?num=1175890350
Cheers Rob that link is working :y
Logged
Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #9 on: 24 February 2011, 18:24:41 »
Quote
Quote
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
If you swap hubs assembly as pictured with baring assembly attached you'll need to re set the camber. Better to remove the baring assembly by undoing the 320 mill nut and swap just those... Unless theres a problem with the hub assembly?.

There is some possible confussion with terminology here.
Baring is pressed in to the metal flange bit the wheels bolt to. It comes as one bit, so thats the baring in its own assembly imo.

Thats bolted to what i call the hub assembly and holds the caliper/wheel and baring/shock in place...

To swap, the shock has to be removed and therefor the camber setting will be lost.


Hope i've described that clearly  :-/ 
Nope. Bearing & hub is one unit
« Last Edit: 24 February 2011, 18:28:58 by RobG »
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

feeutfo

  • Guest
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #10 on: 24 February 2011, 18:39:39 »
Quote
Quote
Quote
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
If you swap hubs assembly as pictured with baring assembly attached you'll need to re set the camber. Better to remove the baring assembly by undoing the 320 mill nut and swap just those... Unless theres a problem with the hub assembly?.

There is some possible confussion with terminology here.
Baring is pressed in to the metal flange bit the wheels bolt to. It comes as one bit, so thats the baring in its own assembly imo.

Thats bolted to what i call the hub assembly and holds the caliper/wheel and baring/shock in place...

To swap, the shock has to be removed and therefor the camber setting will be lost.


Hope i've described that clearly  :-/ 
Nope. Bearing & hub is one unit
Yes we are talking about the same thing, except i'm calliing the hub the bit the baring bolts to...?  ;D

Jims pic shows the ..... Hub (Axle?) On the back?
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #11 on: 24 February 2011, 19:05:37 »
Quote
Quote
Quote
Quote
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
If you swap hubs assembly as pictured with baring assembly attached you'll need to re set the camber. Better to remove the baring assembly by undoing the 320 mill nut and swap just those... Unless theres a problem with the hub assembly?.

There is some possible confussion with terminology here.
Baring is pressed in to the metal flange bit the wheels bolt to. It comes as one bit, so thats the baring in its own assembly imo.

Thats bolted to what i call the hub assembly and holds the caliper/wheel and baring/shock in place...

To swap, the shock has to be removed and therefor the camber setting will be lost.


Hope i've described that clearly  :-/ 
Nope. Bearing & hub is one unit
Yes we are talking about the same thing, except i'm calliing the hub the bit the baring bolts to...?  ;D

Jims pic shows the ..... Hub (Axle?) On the back?
Stub axle Chris ;)
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

feeutfo

  • Guest
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #12 on: 24 February 2011, 19:17:34 »
Quote
Quote
Quote
Quote
Quote
Quote
Hub nut is 320 nm so will need holding very firmly to undo if off the car!

Apart from that st easy enougj to do on the front.
Is that to change the complete hub as in the pic??
If you swap hubs assembly as pictured with baring assembly attached you'll need to re set the camber. Better to remove the baring assembly by undoing the 320 mill nut and swap just those... Unless theres a problem with the hub assembly?.

There is some possible confussion with terminology here.
Baring is pressed in to the metal flange bit the wheels bolt to. It comes as one bit, so thats the baring in its own assembly imo.

Thats bolted to what i call the hub assembly and holds the caliper/wheel and baring/shock in place...

To swap, the shock has to be removed and therefor the camber setting will be lost.


Hope i've described that clearly  :-/ 
Nope. Bearing & hub is one unit
Yes we are talking about the same thing, except i'm calliing the hub the bit the baring bolts to...?  ;D

Jims pic shows the ..... Hub (Axle?) On the back?
Stub axle Chris ;)
yes that ;D
Logged

Jim

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 3176
    • Irmscher 3.2 V6 Elite
    • View Profile
    • My Vauxhall Omega's
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #13 on: 24 February 2011, 19:29:54 »
I'm not sure if its the correct picture as I borrowed it from ebay, But its listed as the front 5 stud bearing carrier + abs sensor

http://cgi.ebay.co.uk/OMEGA-O-S-5-STUD-HUB-BEARING-CARRIER-ABS-SENSOR-94-03-/110609254217?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c0d34749
Logged
Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: How Hard Is It To Change Front Wheel Bearings?????
« Reply #14 on: 24 February 2011, 20:38:38 »
Quote
I'm not sure if its the correct picture as I borrowed it from ebay, But its listed as the front 5 stud bearing carrier + abs sensor

http://cgi.ebay.co.uk/OMEGA-O-S-5-STUD-HUB-BEARING-CARRIER-ABS-SENSOR-94-03-/110609254217?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c0d34749
Is that what you`re buying
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted
Pages: [1] 2 3  All   Go Up
« previous next »
 

Page created in 0.016 seconds with 17 queries.