Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2] 3 4  All   Go Down

Author Topic: HEEEEEELP !!!!  (Read 3542 times)

0 Members and 1 Guest are viewing this topic.

hotel21

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • The Kingdom of Fife
  • Posts: 13021
    • View Profile
Re: HEEEEEELP !!!!
« Reply #15 on: 31 March 2011, 12:37:27 »
Can you even get a slight indentation in the edge with a sharp chisel Nige?  All you are looking for obviously is the start of a bite so that you can apply some rotational idiottings with a heavy club hammer/chisel combo to start it off.....
Logged

bigegg

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Leeds
  • Posts: 1218
    • MV6 RIP - Lexus GS300 '99
    • View Profile
Re: HEEEEEELP !!!!
« Reply #16 on: 31 March 2011, 12:44:32 »
Quote
Its a bearing running face and so hardened (and probably chromed).
figures...

Are you close enough to the kitchen to heat up a steel bar to redhot on the hob, and then apply it to the bearing?
Logged
Carpe Incendium

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: HEEEEEELP !!!!
« Reply #17 on: 31 March 2011, 12:52:07 »
It's just started to move a tad .. about 1/8th " so far .. :(  but I think I've just mullered the ABS sensor thing .. plastic top has flown off in a trilion bits leaving a sorry looking.. and very dirty , flat sensor thing exposed !!  :(
Logged

Lazydocker

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Woodbridge, Suffolk
  • Posts: 18848
  • Constantly Bullied by a certain Admin
    • View Profile
Re: HEEEEEELP !!!!
« Reply #18 on: 31 March 2011, 12:59:30 »
If it's started to move you've done the hardest bit! Get a chisel in the gap and keep going around :y

As for the sensor... :( :( :( Think You'll be needing SWTSMBO's car anyway ::)

But you'll be able to get it all back together and replace the sensor when you get it... May not have ABS though ::) I say may because it might still pick up OK until it gets some water inside it

« Last Edit: 31 March 2011, 13:01:03 by Lazydocker »
Logged
Whatever it is... I didn't do it

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: HEEEEEELP !!!!
« Reply #19 on: 31 March 2011, 13:04:32 »
Thatsa first.

Sensor may work if its just the casing damaged but, source a second hadn one to fit later (as they never fail).

As already stated by others, the usual trick is a small cut with a grinder and then a cold chisel in the cut.

If it is moving then keep hitting it!
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39843
    • ML350 TDM SmartRoadster
    • View Profile
Re: HEEEEEELP !!!!
« Reply #20 on: 31 March 2011, 13:15:47 »
Now I've seen the picture I'd definitely get the grinder out. I wouldn't try a simple slit into it though, you're bound to grind something else that you don't want grinding  ::). Use an ordinary disc ie not slitting disc & grind a nice big flat on it till your flat is almost ready to grind a flat onto the stub axle. You'll know when you're nearly there cos the thinnest bit - in the middle of the flat - will be blue due to the heat and then gradually going through dark & light straw colours towards the edges. Although a small flat on the stub axle won't do any harm, it's best avoided so just before it breaks though hit the inner with your hammer & drift, the heat generated will have helped, & you'll either split it or it'll have expanded enough to be removed.  :y  :y  :y
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: HEEEEEELP !!!!
« Reply #21 on: 31 March 2011, 13:45:48 »
Thanks to all ... B*****d thing is now off !!

Combination of all the ideas ... 6" grinder blade (ony metal one I've got) wouldn't get in very well but enough to make a dent or two on the top surface.. also got it nice and hot ... then alternate idiotting in both directions with a cold chisel in those dents and it eventually started to rotate a tad.. lots of plus gas and more idiotting ..alternating with the claw hammer behind it to ease it forward.

Not a fun job. Who said it came off easily ??

RobG ... lying b*****d !!   :D :D :D :D :D

http://www.omegaowners.com/forum/YaBB.pl?num=1300977424/30#30

Now going for coffee and elastoplasts before starting re-assembly ..
« Last Edit: 31 March 2011, 13:46:56 by entwood »
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: HEEEEEELP !!!!
« Reply #22 on: 31 March 2011, 13:46:27 »
Bugger, just threw away an ABS sensor (attached to a front hub) last weekend. Law of bloody sod.

Might have another sensor if you need Entwood...
Logged
Grumpy old man

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: HEEEEEELP !!!!
« Reply #23 on: 31 March 2011, 13:47:52 »
Quote
Thanks to all ... B*****d thing is now off !!

Combination of all the ideas ... 6" grinder blade (ony metal one I've got) wouldn't get in very well but enough to make a dent or two on the top surface.. also got it nice and hot ... then alternate idiotting in both directions with a cold chisel in those dents and it eventually started to rotate a tad.. lots of plus gas and more idiotting ..alternating with the claw hammer behind it to ease it forward.

Not a fun job. Who said it came off easily ??

RobG ... lying b*****d !!   :D :D :D :D :D

http://www.omegaowners.com/forum/YaBB.pl?num=1300977424/30#30

Now going for coffee and elastoplasts before starting re-assembly ..
Excellent :y

I've done this watched MDTM do this twice now, each time it looked easy ;D
Logged
Grumpy old man

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: HEEEEEELP !!!!
« Reply #24 on: 31 March 2011, 13:48:18 »
Quote
Bugger, just threw away an ABS sensor (attached to a front hub) last weekend. Law of bloody sod.

Might have another sensor if you need Entwood...

If you have one I'll willing purchase it ... unprotected its bound to fail .. even if it works now !!! 

Looks like its changeable from the rear without taking the hub apart .. again .. :)
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: HEEEEEELP !!!!
« Reply #25 on: 31 March 2011, 13:48:57 »
Quote
Thanks to all ... B*****d thing is now off !!

Combination of all the ideas ... 6" grinder blade (ony metal one I've got) wouldn't get in very well but enough to make a dent or two on the top surface.. also got it nice and hot ... then alternate idiotting in both directions with a cold chisel in those dents and it eventually started to rotate a tad.. lots of plus gas and more idiotting ..alternating with the claw hammer behind it to ease it forward.

Not a fun job. Who said it came off easily ??

RobG ... lying b*****d !!  :D :D :D :D :D

http://www.omegaowners.com/forum/YaBB.pl?num=1300977424/30#30

Now going for coffee and elastoplasts before starting re-assembly ..
I`ve done 5 in total, never had any problems, never broke anything ::) I suppose it helps if you know what you`re doing ;D ;D ;D ;D :D
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: HEEEEEELP !!!!
« Reply #26 on: 31 March 2011, 13:50:53 »
Quote
Quote
Bugger, just threw away an ABS sensor (attached to a front hub) last weekend. Law of bloody sod.

Might have another sensor if you need Entwood...

If you have one I'll willing purchase it ... unprotected its bound to fail .. even if it works now !!! 

Looks like its changeable from the rear without taking the hub apart .. again .. :)
Think you may have to whip the disc off Nige & drive the old one out. When you fit the replacement sensor (tight) make sure the bolthole is lined up
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: HEEEEEELP !!!!
« Reply #27 on: 31 March 2011, 13:56:25 »
Quote
Quote
Bugger, just threw away an ABS sensor (attached to a front hub) last weekend. Law of bloody sod.

Might have another sensor if you need Entwood...

If you have one I'll willing purchase it ... unprotected its bound to fail .. even if it works now !!! 

Looks like its changeable from the rear without taking the hub apart .. again .. :)
PM me your address, I'll get it in post over weekend. Free.
Logged
Grumpy old man

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107297
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: HEEEEEELP !!!!
« Reply #28 on: 31 March 2011, 14:30:17 »
Quote
Quote
Quote
Bugger, just threw away an ABS sensor (attached to a front hub) last weekend. Law of bloody sod.

Might have another sensor if you need Entwood...

If you have one I'll willing purchase it ... unprotected its bound to fail .. even if it works now !!! 

Looks like its changeable from the rear without taking the hub apart .. again .. :)
PM me your address, I'll get it in post over weekend. Free.
Scrub that, I damaged it whilst removing  :-[

Seems (unless mine was particularly seized) that drifting the old one out isn't going to work  :-[
Logged
Grumpy old man

gstylebaby

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • stockport
  • Posts: 1272
  • Ever dance with the devil in the pale moon light
    • View Profile
Re: HEEEEEELP !!!!
« Reply #29 on: 31 March 2011, 14:31:25 »
Quote
Quote
Thanks to all ... B*****d thing is now off !!

Combination of all the ideas ... 6" grinder blade (ony metal one I've got) wouldn't get in very well but enough to make a dent or two on the top surface.. also got it nice and hot ... then alternate idiotting in both directions with a cold chisel in those dents and it eventually started to rotate a tad.. lots of plus gas and more idiotting ..alternating with the claw hammer behind it to ease it forward.

Not a fun job. Who said it came off easily ??

RobG ... lying b*****d !!  :D :D :D :D :D

http://www.omegaowners.com/forum/YaBB.pl?num=1300977424/30#30

Now going for coffee and elastoplasts before starting re-assembly ..
I`ve done 5 in total, never had any problems, never broke anything ::) I suppose it helps if you know what you`re doing ;D ;D ;D ;D :D

You wind up. ;D ;D ;D ;D Glad you got it off hope mine come off o.k when i do mine.
Logged
Pages: 1 [2] 3 4  All   Go Up
« previous next »
 

Page created in 0.014 seconds with 17 queries.