Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[andyross]

new to forum so please be easy on me.have changed hbv now car is running very rough could this happen if i put hoses on wrong

[RobG]

Apart from the HBV have you disturbed any electrical connections :question

[TheBoy]

Is it getting VERY hot?


Move likely and air leak if you removed plenum/breather etc.

What did you do to remove HBV?

[RobG]

Is it getting VERY hot?


Move likely and air leak if you removed plenum/breather etc.

What did you do to remove HBV?

4-Pot

[andyross]

removed scuttle and fought with hoses by feel instead of seeing

[RobG]

Is the small vac pipe connected to the top of the HBV

[andyross]

yes.wondering if the hoses are on wrong heater blowing cold.any help much appreciated

[RobG]

The two spigots one side of the HBV........top hose from matrix coming through bulkhead goes to the top spigot.........bottom hose to bottom

[andyross]

Thanks for help i have extra hoses for lpg.can u help with layout

[andyross]

Should you be able to blow through the spiggots evenly or is there a fault.thanks

[RobG]

Thanks for help i have extra hoses for lpg.can u help with layout

Ideally LPG vapouriser should be fed from the main coolant hose going to single spigot of HBV.........said hose should be cut then connect the "flow" pipe to vapouriser from engine side of coolant hose and "return" pipe from vapouriser to hose going to HBV.
Think that`s right :-/ if not someone will no doubt correct me

[andyross]

Thank you.All warm again