Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: 1 [2]  All   Go Down

Author Topic: Checking solenoids on auto box  (Read 2140 times)

0 Members and 1 Guest are viewing this topic.

KJO

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Cork
  • Posts: 101
    • View Profile
Re: Checking solenoids on auto box
« Reply #15 on: 01 April 2011, 16:29:29 »
To continue the saga. Took the car to my tame mechanic to have the selector switch removed & cleaned. He duly removed it took it appart & low & behold it was full of dirt & the contacts were worn away. One 'phone call later a replacement switch sourced & fitted (hopes rise). Test the car . Starts off in 1st but shudders & moves away at the speed of a Sinclair C5. Check oil level, its low so put in a litre, so hopes rise again. Off the hoist to test, again pulls away again like a Sinclair C5 shuddering. Admit defeat. The torque converter is shot & no it has never had a tow hitch on it. However it was used as a taxi for a year. So it turns out that the Forum & the gearbox boys are both right. Don't know how a box in can be knackered in 125k. The Rover Sterling I had did 212k & the autobox was still going strong. :'( :'( :'(   
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Checking solenoids on auto box
« Reply #16 on: 01 April 2011, 16:44:57 »
Unlikely to be the torque converter. Not much to fail in that.  Have you checked the basics - fluid level and condition? Any debris in the autobox sumps?

Does the car drive OK if you manually shift through the gears using the lever?

Kevin
« Last Edit: 01 April 2011, 16:45:49 by Kevin_Wood »
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

Raymienets

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Glasgow
  • Posts: 537
    • 2.2 cd & 2.6 LPG
    • View Profile
Re: Checking solenoids on auto box
« Reply #17 on: 01 April 2011, 23:18:15 »
Could it be the solenoid?
Logged

feeutfo

  • Guest
Re: Checking solenoids on auto box
« Reply #18 on: 02 April 2011, 02:32:29 »
Any cam sensor fault?
Oof recommended service interval is 60k for auto box ATF dex 3. Do not believe vx when they say it's a sealed unit, it is not.

Remove the sumps and check for debris IMO.
Logged

Auto Addict

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • North Birmingham
  • Posts: 13554
  • Back to Vx to keep TB happy
    • Astra K Elite ST
    • View Profile
Re: Checking solenoids on auto box
« Reply #19 on: 02 April 2011, 09:17:12 »
Quote
Any cam sensor fault?Oof recommended service interval is 60k for auto box ATF dex 3. Do not believe vx when they say it's a sealed unit, it is not.

Remove the sumps and check for debris IMO.

I've been thinking along those lines.
Logged
I like red cars

KJO

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Cork
  • Posts: 101
    • View Profile
Re: Checking solenoids on auto box
« Reply #20 on: 14 April 2011, 10:04:45 »
Decided to cut my losses. Would not start in drive without shuddering violently. Had an offer of an auto box for 250 which had only done 15k. Felt it was the best option rather than keeping spending money to find out what was wrong with the old  box on the car. Now the replacement box is fitted it is working fine & the fuel consumption has improved by 5 mpg. :y
Logged

feeutfo

  • Guest
Re: Checking solenoids on auto box
« Reply #21 on: 14 April 2011, 10:21:42 »
Good news.  :y
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.