Topic: Passenger seat height adjust failure (Read 841 times)

Clarkey · « **on:** 10 May 2011, 22:04:59 »

Have a 01 Omega with elec. seat height adjustment. When I operate the switch to adjust height I just get a clunk but no movement. Is it motor failure as I suspect or is there something seized in the seat base? Any advice appreciated.

unclelicklug · « **Reply #1 on:** 10 May 2011, 23:03:40 »

Almost certainly just a sticky adjuster - there's a good guide somewhere on here to freeing this and I'll go and have a look for you......from memory, in short go into the back seat, get down and pull off the plastic cover at the bottom of the seat and then you can send a socket (13mm?) down the hole and operate the mechanism by hand for a few turns.
Once you get it moving again the motor will be able to operate fine.

unclelicklug · « **Reply #2 on:** 10 May 2011, 23:07:29 »

Here you go

http://www.omegaowners.com/forum/YaBB.pl?num=1163236766

Clarkey · « **Reply #3 on:** 11 May 2011, 11:40:46 »

Great stuff. Thanks for that.

unclelicklug · « **Reply #4 on:** 11 May 2011, 13:05:35 »

Most welcome, any credit really belongs with Mark and all the other guide authors, more guides here...

http://www.omegaowners.com/forum/YaBB.pl?num=1259003779

News:

Author Topic: Passenger seat height adjust failure (Read 841 times)

Clarkey

Passenger seat height adjust failure

unclelicklug

Re: Passenger seat height adjust failure

unclelicklug

Re: Passenger seat height adjust failure

Clarkey

Re: Passenger seat height adjust failure

unclelicklug

Re: Passenger seat height adjust failure