Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: door check strap repair? wrong bits?  (Read 3193 times)

0 Members and 1 Guest are viewing this topic.

o-meg-a

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • south wales
  • Posts: 587
  • avatar disabled meantime as its mahoosive!
    • View Profile
door check strap repair? wrong bits?
« on: 18 May 2011, 18:44:20 »
Went to my local vx dealer, ordered bits from part numbers here on oof.

and this is what they gave me.....

Logged

o-meg-a

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • south wales
  • Posts: 587
  • avatar disabled meantime as its mahoosive!
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #1 on: 18 May 2011, 18:44:53 »
The repair plates dont even come  close to fitting in the door gap....and no nuts for the hex bolts....


oh, and they would only let me buy the white washers in packs of 5 lol
« Last Edit: 18 May 2011, 18:45:25 by o-meg-a »
Logged

Tonka.

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Lincoln, Lincolnshire
  • Posts: 1105
    • 2000 2.5 CDX
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #2 on: 18 May 2011, 19:03:53 »
That's the same as I got for mine. Then it was grinder time  :y
Logged

The happiest people don't have the best of everything,
they just make the best of everything they have.

o-meg-a

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • south wales
  • Posts: 587
  • avatar disabled meantime as its mahoosive!
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #3 on: 18 May 2011, 19:07:59 »
hmm....thats annoying, because the pictures i saw before were the right shape and black....

i havent got a grinder, or a vice......so that's a bit difficult for me...
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34119
  • Git!
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #4 on: 18 May 2011, 19:31:03 »
Have you actualy READ the maintenance guide......
Logged

o-meg-a

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • south wales
  • Posts: 587
  • avatar disabled meantime as its mahoosive!
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #5 on: 18 May 2011, 20:00:26 »
ok well now i've read it again i see why i'm finding this so confusing.

besides shortening and rounding the plates (my bad)..

My check strap has actually completely detached from whatever was holing it before....So mmy confusion regarding nuts etc is well founded.

i juts have the check strap bar, going into the door...attached to nothing at all. No backing, no mechanism.

hence not knowing why there were no nuts included.

the door metal is all torn up and there's barely a hole left for the torx to go through.....let alone anything else.

Looks like it's going to be a little more complicated.
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39915
    • ML350 TDM SmartRoadster
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #6 on: 18 May 2011, 20:16:32 »
Quote
ok well now i've read it again i see why i'm finding this so confusing.

besides shortening and rounding the plates (my bad)..

My check strap has actually completely detached from whatever was holing it before....So mmy confusion regarding nuts etc is well founded.

i juts have the check strap bar, going into the door...attached to nothing at all. No backing, no mechanism.

hence not knowing why there were no nuts included.

the door metal is all torn up and there's barely a hole left for the torx to go through.....let alone anything else.

Looks like it's going to be a little more complicated.

you need to see what you have left regarding the check strap when you get the door card off. Mine was in bits in the bottom of the door, but often you'll find it's OK but with bits of the door still fastened to it. My door had ripped right through, but a reinforcing plate either side of the door skin has been enough to bodge a repair over the last few years.  ;) ;)
Logged

hotel21

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • The Kingdom of Fife
  • Posts: 13021
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #7 on: 18 May 2011, 20:22:43 »
Apart from an excess of white washers, the bits you have are, to my recollection, what you need to effect a repair.

The screws are longer than the originals (or should be) and the order of assembly, from inside the door towards the pillar is,,,

Checkstrap base, repair plate 1, ripped door frame metal, repair plate 2 then screws.

It all gets squished together where the repair plates sandwich the remains of the door into something resembling the solid.

You are pretty much rubber ducked if the housing for the plastic bush is pulled away from the A pillar.  If thats the case, its really a door removal job to give sufficient access to weld it up, carefully to stop burning inside the pillar and the car, then reassembly.   :y

edit to add - the screws screw into the checkstrap base thus no additional nuts (should be) required.
« Last Edit: 18 May 2011, 20:25:46 by hotel21 »
Logged

o-meg-a

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • south wales
  • Posts: 587
  • avatar disabled meantime as its mahoosive!
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #8 on: 18 May 2011, 20:33:18 »
Think i didnt make myself clear.


There is no check strap "base".........
Nothing for them to screw into, this was my point, and the reason i was confused.


the chassis attachment is fine. not pulled away or anything.

Inside the door, there is nothing on the end of the metal rod...at all
Logged

hotel21

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • The Kingdom of Fife
  • Posts: 13021
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #9 on: 18 May 2011, 20:34:54 »
In that case, you also need a new checkstrap.   :y
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39915
    • ML350 TDM SmartRoadster
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #10 on: 18 May 2011, 20:35:43 »
Quote
....
There is no check strap "base".........
Nothing for them to screw into, this was my point, and the reason i was confused.  ...

the remnants will be in the bottom of the door .....as said above  ;)
A new check strap was IIRC around £20.
Logged

o-meg-a

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • south wales
  • Posts: 587
  • avatar disabled meantime as its mahoosive!
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #11 on: 18 May 2011, 20:38:00 »
it may well be someone has had a go at this before and failed, because there are no remnants in the door! lol.

Can i order these new? at VX on trade club?
Or should i be looking at a breakers?
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39915
    • ML350 TDM SmartRoadster
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #12 on: 18 May 2011, 20:41:12 »
Quote
it may well be someone has had a go at this before and failed, because there are no remnants in the door! lol.

Can i order these new? at VX on trade club?
Or should i be looking at a breakers?

OK  ;)
Check strap isn't on Trade Club, but your dealer may give you ordinary trade prices.
Depends how much your scrap yard wants when you consider what the cost of new one.  :-/ :y
Logged

o-meg-a

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • south wales
  • Posts: 587
  • avatar disabled meantime as its mahoosive!
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #13 on: 18 May 2011, 20:47:05 »
Thanks for looking that up. will look into it
Logged

hotel21

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • The Kingdom of Fife
  • Posts: 13021
    • View Profile
Re: door check strap repair? wrong bits?
« Reply #14 on: 18 May 2011, 20:49:45 »
Not the best of piccies, but a couple of happy snaps from my spares box in the garage.



Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.