Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Stallion]

Iv had enough of the buggered blank CID screen in the car at the moment and was wondering can i replace it with a standard (any) screen that came with the other models. that way maybe i can see something than be blinded by a white light? TIA guys 

[tunnie]

you could fit a GID (half height graphical display)

As far as I know they are not paired to the HU unlike the CID, it may need adjusting with Tech2, unless it comes from same engine/gearbox setup 

[feeutfo]

GID. Half hight joby. Nowhere near as clear and easy to use as a working CID though. Tried Bba re man for repair?

[feeutfo]

Will need de pair and re pair via tech two only if fitting any other compatible screen though.

[2woody]

I've probably got one or two of the half-height jobbies if needed.

[Stallion]

But just letting you guys know would i still need to depair the screen when i havent got ncdc 2013 stereo got aftermarket HU in there!
 2woody might take up on the offer depending on th outcome of this post

[Stallion]

Ok thats another thing, i took of my stereo unit as my screen was buggered and it was a easier option than sourcing a new screen. now that i have a aftermarket HU, what should i expect CID/GID to be displaying..

[VXL V6]

Hmmm. If you have no plans to go back to the 2013 and want to stick with an aftermarket HU i'd suggest popping a TID or MID in there.

Oh and if you want to sell the Faulty CID and HU then let me know!!!!

[TheBoy]

Yes, I'm always up for buying the stuff at the right price , even broken CIDs

A MID is what you need (grey plug), a new wiper stalk, and 2 wires run from stalk to display

[Stallion]

coolio? so the only color one is CID, the rest are pixelated black screen, which is the one that takes up the whole screen?

VXL V6 - the units out, the screen still in there. do i need to depair the screen or can i just take it off as long as both the unit and screen stay and get installed together..

[VXL V6]

I have the wiper stalk with the control buttons if required.

EDIT: Yes the HU and Screen need to stay together unless depaired by Tech II.

TB and I are very interested in this kit as we are trying to learn more about it (especially the CID's) so any kit that is faulty is good to experiment on!

[Stallion]

TB is that a hard job or general knowledge!

[VXL V6]

Job not hard. Advice is on here somewhere but we can talk you through what is required.

[Stallion]

Aint pulling anyones leg, but which should i go out looking for GID/MID which is easier to source!

[VXL V6]

Later style MID. I have a couple here but they will need the config changing via Tech II otherwise the fuel computer etc will be out. Not a big problem, Mr TB can sort that one out!