Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Cam gasket problem  (Read 732 times)

0 Members and 1 Guest are viewing this topic.

henri

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Vendee France near La Sable D'
  • Posts: 70
    • View Profile
Cam gasket problem
« on: 27 May 2011, 15:48:35 »
Need some help guys ,Started the strip down to replace gaskets got as far as taking the plenum off and had to stop have had an emergency come up so had to put everything back. Started the engine and the emissions light is staying on,not blinking,constant,have not driven anywhere yet so dont know if it will go off.What have I done wrong? :-[ :-[ 
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16628
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Cam gasket problem
« Reply #1 on: 27 May 2011, 16:34:18 »
My money is on you not reconnecting either

A - Front drive by wire connector
B - Rear multiram connector

Does it rev when you press the go pedal? If no, then A is your fault.

Otherwise it's probably B!

Less likely, are all the O rings seated, just thinking you may have introduced an airleak?

Cheers,
James
Logged

henri

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Vendee France near La Sable D'
  • Posts: 70
    • View Profile
Re: Cam gasket problem
« Reply #2 on: 28 May 2011, 13:32:37 »
Quote
My money is on you not reconnecting either

A - Front drive by wire connector
B - Rear multiram connector

Does it rev when you press the go pedal? If no, then A is your fault.

Otherwise it's probably B!

Less likely, are all the O rings seated, just thinking you may have introduced an airleak?

Cheers,
James

Thanks for the advice James,checked the items you mentioned and all connected,loosed the torque bolts slightly and retightened ,left it overnight and the next day when I started the light went out as normal so fingers crossed the problems gone lol :y :y :y
Logged

feeutfo

  • Guest
Re: Cam gasket problem
« Reply #3 on: 29 May 2011, 07:49:54 »
Pedal trick for fault code.
« Last Edit: 29 May 2011, 07:50:48 by chrisgixer »
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.02 seconds with 16 queries.