Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: torque setting for poly bushes  (Read 436 times)

0 Members and 1 Guest are viewing this topic.

plym ian

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Plymouth, Devon
  • Posts: 2997
    • 2.0 insignia elite tourer
    • View Profile
torque setting for poly bushes
« on: 07 June 2011, 08:07:58 »
Doing my wishbone and roll bar poly bushes tomorrow just don't know the torque they should be. Cheers Ian :y
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: torque setting for poly bushes
« Reply #1 on: 07 June 2011, 08:15:49 »
Anti-roll bar drop link = 65Nm

Wishbones pivot bolts
Stage 1 = 120 Nm
Stage 2 = Angle tighten 30deg
stage 3 = Angle tighten 15deg

balljoint to arm 35Nm
balljoint to knuckle - 100Nm

Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 16 queries.