Topic: code 16 knock circuit 1. (Read 412 times)

Pip · « **on:** 21 August 2011, 17:50:20 »

Hello,

I took my inlet manifold off my 3.0 yesterday to fit the one id set up with the LPG conversion but it wasn't running right afterwards and was giving a code 16 "Knock circuit 1" message, I assumed it was part of the LPG throwing it up so removed it all and refitted the original manifold but the problem has not gone away, it shows intermittent loss of power especially noticeable when pulling off. Ive some spare knock sensors I was going to try but does anyone know which side No1 is? and do you recon that will cure the problem?

Cheers
Phil

TheBoy · « **Reply #1 on:** 21 August 2011, 19:02:48 »

Is it plugged in? Any damage to its cable, can catch on Aux belt.

Pip · « **Reply #2 on:** 21 August 2011, 19:46:09 »

That's why I love this forum, As soon as I saw your reply I remember hearing a small rubbing noise that didn't last long and I soon forgot about, but sure enough a quick check there and found the wire has practically rubbed right through. Hopefully that will be that and you will have saved me hours of head scratching.
Cheers
Phil.

News:

Author Topic: code 16 knock circuit 1. (Read 412 times)

Pip

code 16 knock circuit 1.

TheBoy

Re: code 16 knock circuit 1.

Pip

Re: code 16 knock circuit 1.