Topic: fitting facelift doors to a preface lift?? (Read 707 times)

bigGmv6 · « **on:** 19 September 2011, 18:21:55 »

Hey, just getting my mv6 ready for MOT. Afterwards I am planning on changing the doors, can get four really good doors but they are from a face lift, mines is a pre facelift. Thought would be more cost-effective than spraying. Question is, are there any issues with this? Will my door trims fit ok? Any help will be greatly appreciated.

Thanks for now

omegod · « **Reply #1 on:** 19 September 2011, 19:31:42 »

Doors will fit but the trims are different, if you get the body colour trim off the facelift front wings the car will be updated a treat, back bumper fits too if you can get that.

You will prob need to change the door loom too, bit fiddly but not hard.

Andy B · « **Reply #2 on:** 19 September 2011, 19:40:29 »

Quote

.....

You will prob need to change the door loom too, bit fiddly but not hard.

you'll definitely have to change the door looms as later cars have electric window switches in the door & not the centre console like earlier cars.

bigGmv6 · « **Reply #3 on:** 20 September 2011, 09:48:46 »

thanks for the replies, think i'll give it a go. will keep you updated

News:

Author Topic: fitting facelift doors to a preface lift?? (Read 707 times)

bigGmv6

fitting facelift doors to a preface lift??

omegod

Re: fitting facelift doors to a preface lift??

Andy B

Re: fitting facelift doors to a preface lift??

bigGmv6

Re: fitting facelift doors to a preface lift??