Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

Marks_DTM's prefacelift is a 99 car, so it must have changed between 98 and 99 then?


M_DTM - did you measure mine at Telford?

No, I was to busy with my head under the other end

You got the 4 small holes for the mounting screws for the subs?

[NickA]

yes mark shelf has holes nearly out only discs held in with small amounts of meatel

Just been and double checked.....unless the indents are only in the top of the panel, there is nothing  

When I fitted mine the rear shelf definitely didn't have any cutouts. That's on an 02 plate MV6.

[psnimv6]

my 01 mv6 is the same no holes at all and i also have a bose to install so will be watching with interest what the experts do on this  

[Marks DTM Calib]

Can anybody measure the hole diameter for the rear metal shelf holes..........think I am going to buy a hole saw!

[TheBoy]

Can anybody measure the hole diameter for the rear metal shelf holes..........think I am going to buy a hole saw!

I may still have my old metal knockouts, if so, I'll measure then (not so easy to measure hole with speaker in place).

The speaker bit is round (even though top of bose bass speakers aren't).  The cut in carpet bit of parcel shelf is D shared, with the slots for the grill clips.

[Jay w]

My 51 CDX is the same, solid rear shelf.

I am looking to fit 6'' speaker in the back have a feeling i will have to get the nibbler out for this.

Am yet to see a drill attachment that will drill out a 5'' hole

[Marks DTM Calib]

My 51 CDX is the same, solid rear shelf.

I am looking to fit 6'' speaker in the back have a feeling i will have to get the nibbler out for this.

Am yet to see a drill attachment that will drill out a 5'' hole

You can get upto a 6 inch cutter for mild steel.

The Bose appear to be 5 ¹/₂ inch