Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Pin connections for CCRT 700  (Read 2028 times)

0 Members and 1 Guest are viewing this topic.

chelseabreaker

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 1
    • View Profile
Pin connections for CCRT 700
« on: 19 July 2008, 17:24:15 »
Has anybody worked out the connections for the top row of a CCRT 700? I am trying to install one in my omega and cannot get the display to show the data

Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106890
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Pin connections for CCRT 700
« Reply #1 on: 19 July 2008, 20:17:04 »
What are you changing it from?  There is a bit of rewiring to do, but if you are replacing a non ccrt700, as a minimum you will need a new display and a new CDC2 (takes an identical looking, but different CDC2 to CCR600/CCR800)
Logged
Grumpy old man

tmx

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Herefordshire
  • Posts: 2131
    • 3.2 MV6 2002
    • View Profile
Re: Pin connections for CCRT 700
« Reply #2 on: 19 July 2008, 20:28:12 »
display is CAN driven! you need to rewire the display connector me and The Boy have retro fitted them its alot of work! and in all honestly it aint worth the bother! a CCR 800 is just as good! and alot less grief and hastle than a CCRT 700

you need a special display for a CCRT to work and a standard CCR2/4/6/800 one wont work!  i think ive got diagrams somewhere that i drew out but they will take some finding but from what i do know you have to swap over 3 wires on the GID/MID/TID/CID connector

The CD changer wires need changing aswell! swapping around but i think i remember the boy telling me his car didnt have these wires where as myn did so you mite need to run more wires from the hu to the cdc!
« Last Edit: 19 July 2008, 20:31:09 by tmx »
Logged

Dave DND

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • DND Services Ltd
  • Posts: 4216
    • Paignton, Devon
    • View Profile
    • DND Services Ltd
Re: Pin connections for CCRT 700
« Reply #3 on: 20 July 2008, 09:00:40 »
Quote
me and The Boy have retro fitted them its alot of work! and in all honestly it aint worth the bother!

I have to agree also, its a hell of a lot of work   :'(
Logged
Radio & Decoding Technician
In Car Audio Service Department
www.dndservices.co.uk

jules

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Edinburgh
  • Posts: 382
  • Woke up this morning a post whore
    • View Profile
Re: Pin connections for CCRT 700
« Reply #4 on: 24 July 2008, 14:33:11 »
and as if by magic, the wiring fairy appeared :

http://www.ccpip.org/800/service/Connctn.html


J
 :D
Logged
Hotel21 wrote 'Its doubtfull in the extreme if it is the head gasket at fault.  If it were burning 5 litres per week the car would leave a smokescreen behind it!'

tmx

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Herefordshire
  • Posts: 2131
    • 3.2 MV6 2002
    • View Profile
Re: Pin connections for CCRT 700
« Reply #5 on: 24 July 2008, 17:14:07 »
that  diagram i found to be is slighly incorrect ! the display wiring is different and a different display is required!
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 18 queries.