Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: omega b pre facelift rear shelf speakers  (Read 1526 times)

0 Members and 1 Guest are viewing this topic.

tunes

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • essex
  • Posts: 37
    • View Profile
omega b pre facelift rear shelf speakers
« on: 08 March 2009, 20:24:51 »
i wanna tap the blank holes out and fit some rear speakers

are they 6.5"? and also is there a loom i can patch them into?

many thanks for any help people
Logged
IF I WANT TO GO IN A STRAIGHT LINE, IL BUY A FORD

tmx

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Herefordshire
  • Posts: 2131
    • 3.2 MV6 2002
    • View Profile
Re: omega b pre facelift rear shelf speakers
« Reply #1 on: 08 March 2009, 20:31:45 »
No Speaker wiring in the parcelshelf unless the car has BOSE

will have to run speaker wires into the boot
Logged

tunes

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • essex
  • Posts: 37
    • View Profile
Re: omega b pre facelift rear shelf speakers
« Reply #2 on: 08 March 2009, 20:44:09 »
where can i run them from?
Logged
IF I WANT TO GO IN A STRAIGHT LINE, IL BUY A FORD

tmx

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Herefordshire
  • Posts: 2131
    • 3.2 MV6 2002
    • View Profile
Re: omega b pre facelift rear shelf speakers
« Reply #3 on: 08 March 2009, 21:07:01 »
you will have to run 2x Pairs to the HU from the boot
Logged

Phil B

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • South Wales
  • Posts: 237
    • View Profile
Re: omega b pre facelift rear shelf speakers
« Reply #4 on: 09 March 2009, 23:43:54 »
Hi tunes, this relates to my current project

I'm just fitting some subs to my shelf, as I believe the bose system locates a pair of subs here, and I don't have room in the boot for a proper sub unit. They are 6 1/2" cut outs, just snip the blank rounds out with some tin snips and a screwdriver for leverage.

I got hold of an Impedance matcher from CPC which I'm going to wire in parallel with the rear door speaker feeds up behind the head unit. From here I was going to wire a long stereo RCA lead to the rear shelf along with power from the battery and fit an amp, which then supplies the shelf speakers.

I was planning to use the low pass switch on the amp so the speakers I fit to the shelf are reinforcing the bass section, hopefully the shelf won't vibrate too much.

Is this something similar to what you're after?
Logged

gstylebaby

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • stockport
  • Posts: 1272
  • Ever dance with the devil in the pale moon light
    • View Profile
Re: omega b pre facelift rear shelf speakers
« Reply #5 on: 10 March 2009, 04:59:53 »
Quote
Hi tunes, this relates to my current project

I'm just fitting some subs to my shelf, as I believe the bose system locates a pair of subs here, and I don't have room in the boot for a proper sub unit. They are 6 1/2" cut outs, just snip the blank rounds out with some tin snips and a screwdriver for leverage.

I got hold of an Impedance matcher from CPC which I'm going to wire in parallel with the rear door speaker feeds up behind the head unit. From here I was going to wire a long stereo RCA lead to the rear shelf along with power from the battery and fit an amp, which then supplies the shelf speakers.

I was planning to use the low pass switch on the amp so the speakers I fit to the shelf are reinforcing the bass section, hopefully the shelf won't vibrate too much.
Is this something similar to what you're after?

Sound dead the shelf then you wont get as much vibration and i think i'm right in saying much more punch. :y
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.017 seconds with 17 queries.