Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stemon]

hi guys any idea how to do this as there is no loom in place? i have all motors and door looms installed now just need to wire them up?

any help would be great as im puzzled

[Marks DTM Calib]

So, when you fitted the door looms and plugged them into the B post sockets, were all the wires in the B post there?

[stemon]

 Hi Mark Nope there is about 4 wires missing on the car loom running to rear doors. ive done an ex plod which plugged straight in no prob, but not much luck on this

[stemon]

im guessing i need a live and earth to each door and need to add the switch control wires but need to work out where to wire these to.

[Marks DTM Calib]

How many wires are you short on the large IDC type connector on the main control switch for the drivers door?

There should be about 20 ish

4 wires is the exact number used by the windows!

[Marks DTM Calib]

Well the red wire goes to fuse F35
The brown black wires connect to pin 24 on the central locking ecu

The final 2 wires from connect to the drivers door main switch.

[stemon]

thanks mark you are a star , that sounds easy enough , where about is the central locking ecu? is it the one in drivers footwell

[Marks DTM Calib]

Yep, behind the drives side kick panel

[tunnie]

i thought all facelifts had leccy windows in the back, except x-plod.

Years ago we had a 99 plate facelift on loan, gls spec, which had leccy rear windows

[hotel21]

[movedhere] Omega General Help [move by] hotel21.

[stemon]

right an update, red , earths , brown and black are all connected.

now i have a problem ive got the two switch ones left  grey/green  and blue/red  but where do they go? ive connected them to the same colours on drivers door loom and the back switch operates the passenger front window?  help lol  

[stemon]

forgot to say, if i connect the blue/red to perm live it makes the rear window go up only on its own.