Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[charlie22]

Using the Auto Scanner Opel CAN I have the following error codes
 Which code to talcke first?

P1555: Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load - Not Present The control unit recognises the malfunction of the circuit via an internal evaluation logic.
Concerned Terminals:
3, 10, 13, 20, 26, 30, 42, 45, 58, 62 (X58)

P0170: Lean Exhaust - Present
Air/fuel mixture constantly too lean
Concerned Terminals:
19 (X58), 35 (X58), 57 (X58)

P0130: O2 Sensor 1 Circuit Voltage Low - Not Present
The voltage at the control unit input (terminal 57 (X58) ) is temporary too low.
The fault is stored directly on recognition.
Concerned Terminals:
19 (X58), 35 (X58), 57 (X58)

P0130: O2 Sensor 1 Incorrect Signal - Not Present
The control unit recognises the malfunction of the circuit via an internal evaluation logic.
Concerned Terminals:
19 (X58), 35 (X58), 57 (X58)

P0302: Cylinder 2 Misfire Detected - Not Present
Too many misfires detected by the crankshaft position sensor
Concerned Terminals:
31 (X58), 63 (X58)

This after removing the error codes

SVS-request from Transmission Control Module
Thanks Nigel

[Marks DTM Calib]

It has symptoms of the cam sensor causing trouble for a 2.2.....although lacking the cam sensor fault code.

[TheBoy]

Worth checking whats in gearbox ecu as well.