Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JK]

It says no tape or something in that order, i think that when the previous owner removed the radio he has lost some of the wiring, i am off outside now to see if i can find it , i know that there is a connector from the main harness to the radio plug ,this is where the wires have been cut ,but i have soldered the wires back together in colour co-ordination, ie black to black etc ---JK

[Dave DND]

black to black etc ---JK

No, I`m sure Black to Black was Amy Winehouse, not Jay Kay (Jamiroqai)

 

[TheBoy]

It says no tape or something in that order, i think that when the previous owner removed the radio he has lost some of the wiring, i am off outside now to see if i can find it , i know that there is a connector from the main harness to the radio plug ,this is where the wires have been cut ,but i have soldered the wires back together in colour co-ordination, ie black to black etc ---JK

NO CASS ?

the headunit is not talking to the cd changer....  ....get numbers as dave dnd says

[JK]

Im older than JK so i'm the original, i think that is how it works, any how after looking at the wiring coming from the cd player i have found a red and white wire that has been caught and thus snapped, i have rejoined the two wires and the cd is now talking to the radio , it has now allowed me to enter the code, which it accepts, and bleeps, and then says cds err ,yesterday when i tried the cd itself yesterday it would accept the disc holder as normal ,but now it won't allow me to insert it ,it is just popping back out, and sometimes if i switch off the radio and then switch it back on it reads no disc, this is probably as the disc holder is not all the way in the cd player, but i am getting by, with a little help from my friends [wet wet wet ] or the beatles --JK

[Dave DND]

OK, now you have it communicating, unplug the changer for one hour, plug back in, enter the code and this will do a hard reset on the changer.

This will allow everything to rest back to normal, as it may previously have been in a confused state due to the wiring. Can`t promise it will work, but worth a try, and certainly "Nothing to Lose" (Claudine Longet)

 

[JK]

Thanks for that i will leave it until tommorow morning--JK

[JK]

Well i left it until the morning and guess what , it did the self and same thing, looks like i need a new Cd player, but i did have a go ,it seems to be out of sequence, i have managed to adjust it slightly so that it now holds down the Cd holder but that is it , I'm no electrical mastermind and i have the conviction to know when it is time to say that's enough, and well that's enough,but it was fun trying ---JK