Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Boracic]

Well it must have one hell of a lot of insulation then as the core is just over 8mm, lol, I just had a look, its about 16mm with the insulation, it will still go through the grommet on the drivers side

[Dave DND]

Well it must have one hell of a lot of insulation then as the core is just over 8mm, lol, I just had a look, its about 16mm with the insulation, it will still go through the grommet on the drivers side

I don`t know what size cable you are looking at, but its a lot smaller than 0 Awg

Sounds like 4awg to me ?  :-/

[lozzy]

lol there will be more current draw than a pair of electric showers i will have around 1000amps at peak 

[Dave DND]

lol there will be more current draw than a pair of electric showers i will have around 1000amps at peak 

What setup are you planning? Sounds interesting?

[lozzy]

im putting 24 10s in my omega in a ported diamond with 9000wrms for bass and 16 eminence 8inch mid bass drivers 2000wrms power and 8 eminence tweeters 360 wrms total powerd on a bank of 10 batteries will dual alternator set

[Andy B]

im putting 24 10s in my omega in a ported diamond with 9000wrms for bass and 16 eminence 8inch mid bass drivers 2000wrms power and 8 eminence tweeters 360 wrms total powerd on a bank of 10 batteries will dual alternator set

What did he say?  :-/  :-/  :-/           

[lozzy]

its the biggest i will have built to date lol they jeep getting bigger and bigger this is the last one im doing in a uk car

[Dave DND]

im putting 24 10s in my omega in a ported diamond with 9000wrms for bass and 16 eminence 8inch mid bass drivers 2000wrms power and 8 eminence tweeters 360 wrms total powerd on a bank of 10 batteries will dual alternator set

What did he say?  :-/  :-/  :-/           

Translates:
He says he knows what he is doing, and has the makings of a very serious full on competition system.
 

Please keep us posted with progress on that one. There are not many on this forum who will understand what you are doing, and I think that some pictures as you go along would generate some very good interest and a major talking point.
 

On a personal and professional note, if you need any help or assistance, give me a yell - I have a lot of experience of this. Biggest I`ve helped with so far was 64x12" in the Pioneer Transit.

8-)
 

[lozzy]

the monster truck pioneer van with a guy called kam ?
you may also know ian pinder ? hes a fellow competitior

il post up a build log as it unfolds or folds together il have post up my port folio of previous installs

[Dave DND]

Yes, I know Kam very well - used to live down the road from me, and Ian Pinder has been over to my place as well on a few occasions over the years !

Say hi to them from me if you see them 

Not sure how long you`ve been on the scene, but if you are familiar with the LOUD! Association a good few years back, I was heavily involved with that from day one with Sid Jervis.

[lozzy]

il pass on the hellos i have been in the lanes for 6 years now i think its now run by a darren millard he taken over db drag uk not sure how long he has been doing it

its a small world in the uk audio industry

[Dave DND]

I`ve been competing since 1992, and after breaking many records (and windscreens), stopped around 2001 ish and spent more time on the technical sides of things and demo / show cars rather than out and out grunt.

its a small world in the uk audio industry

Small World ?  I`d say more inbred than redneck hillbillies !! 

 

[lozzy]

haha your right there !

also another oldie for you paul coughland sp. from motorguard

are you on talk audio alot of them still hang around on thre