Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[albitz]

I have just changed my climate panel. When I put everything back the radio doesnt show on the MID and doesnt want to tune to different staions etc, it is stuck on one station with poor reception.
Before I pull it back out to investigate, would this just be due to the fact that I need to enter the code, or have I not connected it back up properly ? :-/
Tia.

[same #same#]

dose screen part go blank with radio on? may just need pushing the plugs back on

[RobG]

Sounds like radio is not seated properly and not fully engaging rear connectors

[albitz]

Looks like I will have to pull it back out again. The unit is pushed fully home so the connectors may not have seated properly in the cage and popped out.

[RobG]

Remove the cage and make sure they`re fully clipped in

[albitz]

Took the head unit back out today. The multi plugs and antenna lead are all clipped into the cage as they should be.Put the unit back, still no radio display on the MID.
Im stuck tbh, dont know what to do next. :-/

[same #same#]

leve the radio out and take the display out and check the wires from display to radio 3 brown and white wires and a black wire and red wire check them 3 brown and white wires control the display pic.

[same #same#]

sorry mist one blue and white wire also tells dsplay that radio is on.

[albitz]

will try to have a look tomorrow.Thanks.

[albitz]

Sorted now. Although the connectors were clipped into the cage they werent quite seated properly. A bit of fiddling and shoving and its ll ok.

[same #same#]

good