Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1] 2  All   Go Down

Author Topic: NCDC 2013 Radio Safe  (Read 5304 times)

0 Members and 2 Guests are viewing this topic.

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
NCDC 2013 Radio Safe
« on: 10 September 2010, 02:01:02 »
Hi all, jumped into the Omega today and when I went to the nav menu the message "Radio Safe" kept coming up every 5 seconds or so with a loud beep >:(, it also happens in the radio menu but I have noticed that in the main menu and the cd changer menu that it doesnt come up - also the steering wheel controls don't work.
Anyone any ideas as to what is wrong (sounds like a tech 2 session)  :'(.

Thanks in advance  :y.
Logged

Pipsqueak

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Female
  • Leeds
  • Posts: 327
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #1 on: 10 September 2010, 03:23:56 »
If the units are like the old units the cd changer and radio have seperate codes.

I believe these are supplied when the car is purchased and are on the car pass.

Dont think it's as simple as a tech 2 sesion with out the codes, someone else may know different though.
Logged
To know me is to truly love me.

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #2 on: 10 September 2010, 07:30:55 »
The head unit is a NCDC 2013 - they don't use security codes, they are married together so that one cannot work without the other, I'm thinking that somehow the head unit has depaired itself from the CID, any thoughts from anyone on this?
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106824
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #3 on: 10 September 2010, 08:06:59 »
Did it do it next time you started the car?

Wondering if the code negotitation failed this time, though never seen that happen before.


(Assuming you haven't changed anything)
Logged
Grumpy old man

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #4 on: 10 September 2010, 12:21:17 »
Tried restarting car (Leaving it off for a while) I also tried disconnecting and reconnecting the battery but it's still the same.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106824
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #5 on: 10 September 2010, 14:20:56 »
Quote
Tried restarting car (Leaving it off for a while) I also tried disconnecting and reconnecting the battery but it's still the same.
Assuming you haven't changed radio or screen, something has corrupted.  You may end up in a whole heap of smelly mess  :'(
Logged
Grumpy old man

Pipsqueak

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Female
  • Leeds
  • Posts: 327
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #6 on: 10 September 2010, 16:12:46 »
Quote
The head unit is a NCDC 2013 - they don't use security codes, they are married together so that one cannot work without the other, I'm thinking that somehow the head unit has depaired itself from the CID, any thoughts from anyone on this?

My appologies, thought they were coded.   :-[
Logged
To know me is to truly love me.

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #7 on: 10 September 2010, 16:47:44 »
Quote
Quote
The head unit is a NCDC 2013 - they don't use security codes, they are married together so that one cannot work without the other, I'm thinking that somehow the head unit has depaired itself from the CID, any thoughts from anyone on this?

My appologies, thought they were coded.   :-[

I spoke to someone at the dealers today and he thinks they are coded too.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106824
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #8 on: 10 September 2010, 17:00:46 »
Quote
Quote
Quote
The head unit is a NCDC 2013 - they don't use security codes, they are married together so that one cannot work without the other, I'm thinking that somehow the head unit has depaired itself from the CID, any thoughts from anyone on this?

My appologies, thought they were coded.   :-[

I spoke to someone at the dealers today and he thinks they are coded too.
Nope, you were right.  The devices in the 'ring' (NCDC/CD Changer/Screen/Telematics) are all paired together. They are paired with a 4 digit code.  They do not use traditional radio codes that need to be reentered after disconnection.

Note, logically, the CD Change part of the NCDC is a seperate device, even though it is part of the same NCDC unit.
Logged
Grumpy old man

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #9 on: 10 September 2010, 17:15:22 »
I have researched this further and it would seem that the problem is due to the system looking for a telematics unit which does not exist and that this can occur because of a software problem due to a power failure or surge, the solution is to delete the telematics unit and the resulting error (no communication on the bus) that it causes.
Does this sound plausable?
Logged

VXL V6

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 9870
    • 530D M Sport, Elite 3.2
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #10 on: 10 September 2010, 17:20:06 »
Hmmm, unlikely as you don't have a telematics and the system (2013) would not of been configured for one.

More likely is that the CAN communication between headunit and screen has been disrupted or one of the units has lost it's pairing code (corruption). Visit to someone who knows how to use a Tech II (So that wipes out the average dealership) for these headunits is required.
Logged

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #11 on: 10 September 2010, 22:38:12 »
Could it be that the system is corrupted and is now thinking that it has telematics? - I was reading on some of the german forums about people who have experienced the same thing I have and this is what turned out to be the problem.
Logged

VXL V6

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 9870
    • 530D M Sport, Elite 3.2
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #12 on: 10 September 2010, 22:44:09 »
Radio safe means that the HU has no pairing code IMHO.
Logged

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #13 on: 10 September 2010, 23:12:04 »
Do you think a tech 2 session will sort it out? :-?
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106824
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: NCDC 2013 Radio Safe
« Reply #14 on: 11 September 2010, 10:51:42 »
Quote
Could it be that the system is corrupted and is now thinking that it has telematics? - I was reading on some of the german forums about people who have experienced the same thing I have and this is what turned out to be the problem.
WIth my (pretty extensive) testing of coding around these units, I doubt a telematics misconfig would cause that...

...its as if the HU has dropped back into delivery mode (in which case try a depair (will likely fail) and repair using the original pairing code) or has corrupted its code (you could be up a narrow, smelly inlet looking for an oar).


Shame you are overseas, as this is one of those instances where I really would advise anyone to come to me, despite distance, to fix  :'(
Logged
Grumpy old man
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.017 seconds with 16 queries.