Topic: Throttle not responding (Read 966 times)

davey_dublin24 · « **on:** 20 November 2010, 14:35:06 »

right...
I had the cam covers off my 01 omega 2.6 v6 to do the gaskets...
Everything went back together great but when i started the car i had no throttle (car is Fly by wire)
Checked for faults P1500 came up
Posted on the general help and all said it was a loose mutiplug or a broken wire.
I have taken out the wiring loom and found two wires with damage ive snipped them back and rejoined all but still no throttle
Ive gotten in a new potensiometer and fitted and still the same!!!
Does anyone have a wiring diagram for this or can help me in any way?

davey_dublin24 · « **Reply #1 on:** 20 November 2010, 14:57:32 »

Forgot to say TCS light stays on too.
Rev counter works speedo works..
Car idles rough but levels out

Kevin Wood · « **Reply #2 on:** 20 November 2010, 19:30:29 »

Hmm. P1500 is throttle control motor.

I would try cleaning the throttle body and ensuring the throttles can move freely in the first instance. Make sure the connector is secure and perhaps give it a clean.

Kevin

davey_dublin24 · « **Reply #3 on:** 23 November 2010, 08:43:38 »

Thanks Kevin,
Turns out that there might be damage to the earth or there is no earth.I have to strip the car and have a look over all wires again

News:

Author Topic: Throttle not responding (Read 966 times)

davey_dublin24

Throttle not responding

davey_dublin24

Re: Throttle not responding

Kevin Wood

Re: Throttle not responding

davey_dublin24

Re: Throttle not responding