Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ffcgary1]

Hi all ,
i have been able to obtain a CDR500 and want to fit it into my 97 prefacelift tourer, i have the radio pass to go with it so have the code as well.
I fitted it to the car and it works without the code being entered, but the display does not show the radio stations or track no,s, is this a display programing error or is it not compatable with my cars display(MID) i think, so can any one help me please, over to you lot, Gary.

[Jimbob]

may need a button press to convert from 10 to 8 digits...

[Jimbob]

may not apply to yours after all, but may be worth a try

http://www.omegaowners.com/forum/YaBB.pl?num=1176753517

[Andy B]

may need a button press to convert from 10 to 8 digits...

is it 3 & 5 together?  :-/ :-/ :-/


edit
It's not that's 'REG ON/REG OFF' 

[Jim]

I have the same problem.

[Dave DND]

There are two versions of Vauxhall vehicle displays, one with 8 Digits and one with 10 Digits. If you connect this stereo to the wrong display, code entry is possible, but the display will either freeze or dissappear once the code has been entered. To reprogram, Turn off the Radio, Press and Hold Presets "3" & "5" at the same time, whilst switching the radio back on, and this will toggle between the two display modes.

(some radio`s its "4" & "6" instead - depends what you have)

 

[ffcgary1]

Hi all
further to this thread, i can get the display to show 10 digits but cannot get it to change to 8 digits, what am i supposed to press on the radio to toggle between them. just to confirm it is a Delco CDR500.
Dave helpppppp.

[fiend61]

Turn off the Radio, Press and Hold Presets "3" & "5" at the same time, whilst switching the radio back on, and this will toggle between the two display modes.

do as dave has said 

[edit]some radio`s its "4" & "6" instead - depends what you have[/edit]

[ffcgary1]

i have done exactly as dave has said, but it will not change to 8 digits from 10 digits. 3&5 works 4&6 does diddly squat.

[Andy B]

I have a CDR500 that came out of an Astra G that andyc tried to fit in an Omega. He had problems with that too  :-/ although it did & does work perfectly in the Astra.  :-/ :-/

[ffcgary1]

This one too worked fine in the vectra it came out which also had a MID screen. Spooky.
I wish vx could just have std ised all their systems.
It is just done to confuse everyone out side gm trained staff or stealers, the latter seem to be the worst.

[ffcgary1]

Anybody, HEEEEEELLLLLPPPPPP.

[Dave DND]

Pressing the buttons should display either 10 or 8 and repeating the process should toggle between the two

[ffcgary1]

Thank you dave, will try give it a try.

[ffcgary1]

All sorted, thank you again dave your the man.