Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jezzer]

Car: 2.0 16v Auto CDX
I have installed a Pioneer DEH 110 CD Unit - Excellent quality with iPod interface (FM superb, AM reception is very poor but a separate issue already posted as a question)  :-/

I would like to use the 'Steering Remote Controls' advised to buy Autoleads PC99-X06 adapter, it is the correct adapter set, but my mechanic said that there is a lead missing 

Probably a 20pin to 16pin (grey or black connectors) this is supposed to connect from the 'box on the PC99-X06' to the main car loom/steering wheel?
Autoleads refer to something called a 'patchlead' is that what I need?

I was told by my mechanic that this 'lead' should have been left in the car, regardless of what after market stereo was fitted?

Alternatively - if someone has one - happy to purchase!

Cheers!

[Dave DND]

These pictures should help

http://www.dndservices.co.uk/pc99-x06.html

and

http://www.dndservices.co.uk/pc99-son.html

[Jezzer]

Thanks Dave!
I'll check out my unit to see if it has the 3.5 mm jack socket, can't recall seeing it when i fitted the unit though?
 

[Jezzer]

Hi Dave
yep as the 3.5 jack interface, ordered one today!
Thanks for your help! 

[Dave DND]

I`ll get that out 1st thing in the morning for you

 

[Jezzer]

Hi Dave DND
I ordered it via your website about 2 minutes before you replied! at £6.99 (Could have got one on Ebay for £3.99)

Cheers
Jezzer

[Jezzer]

Thanks Dave 

[Dave DND]

Hi Dave DND
I ordered it via your website about 2 minutes before you replied! at £6.99 (Could have got one on Ebay for £3.99)

Cheers
Jezzer

The extra few quid we charge keeps the FREE technical support alive

 

[Jezzer]

I understand  8-)

[Jezzer]

Hi Dave
Thanks for your help in getting the Patch Lead to me.
Unfortunately not working?

I have followed the 'instructions to the letter but not luck.
I  connected the 'new ISO lead' (Autoleads PC99-X06) to the Head Unit, connected the patch lead you supplied (PC99-SON) but didn't plug in the Jack plug.
I then checked to ensure that the Battery/Power was OK (needed swapping over) so the nit was retaining RDS FM Signal and saving them - then plugged in the jack - no luck 
The 'white' wire from the box on the PC99-X06 goes to a 'blue/red' thin wire on the main loom, is this correct?

I also have a larger multi-block connector with at least 24-30 small female pins, these have blue/yellow, white, green and black leads, I assume this must be something to do with the CDC? or OEM  Stereo Unit.
My Head Unit is a Pioneer DEH-110E - all functions working perfectly with superb AM/FM signal (wrong Aerial lead connected to the original head unit, was wired to old mobile phone aerial)CD, AUX.... 

Any ideas?
Is there a separate circuit or fuse for the steering controls?
or somewhere else I can look  :-?
Many thanks
JERRY

[Dave DND]

Sounds like the PC99-X06 may have failed ?

 :-/

The 'white' wire from the box on the PC99-X06 goes to a 'blue/red' thin wire on the main loom, is this correct

?

The PC99-X06 should be a plug and play unit with no wiring modifications necessary - as we didn`t supply that bit, I can`t really comment on it

[Jezzer]

Thanks Dave

Will send it back whence it came a replacement 
Let you know how I get on 

[Dave DND]

Extra pins on the top block are for changer and display, none of which are used on your system. So just leave them disconnected.

 

[Jezzer]

Thanks Dave
I wondered if that was the case, they don't look like they have been for some time? and where tucked right down at the back of the console.