Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1] 2  All   Go Down

Author Topic: how to wire a push button start  (Read 2553 times)

0 Members and 2 Guests are viewing this topic.

AjOmega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Cali
  • Posts: 49
    • View Profile
how to wire a push button start
« on: 25 July 2011, 16:14:56 »
How would i wire a push button start to a cadillac catera
without having a key.. :)
Logged

Osprey

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Redhill, Surrey
  • Posts: 677
  • Drink up. The world's about to end.
    • 01 2.6 Elite saloon
    • View Profile
Re: how to wire a push button start
« Reply #1 on: 25 July 2011, 17:22:45 »
"Hot wiring" to bypass the ignition lock isn't rocket science but it would no doubt contravene OOF rules to go into detail. 

However one of the car's ECUs needs a successful read of the immobiliser chip before it will allow the engint to start.  The immobiliser chip is also contained in the key which, by the sound of it, you don't have.  Getting around that is going to be much more difficult. 

And much less ethical to publish on a public forum.   ;)
Logged
I feel like a military academy. Bits of me keep passing out.

AjOmega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Cali
  • Posts: 49
    • View Profile
Re: how to wire a push button start
« Reply #2 on: 25 July 2011, 17:25:48 »
i have the key to the car i just broke the back of the ignition that goes into the igntion switch i was just thinking a push button would ve been cheaper then going to buy a whole new ignition.
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: how to wire a push button start
« Reply #3 on: 25 July 2011, 17:52:10 »
Quote
i have the key to the car i just broke the back of the ignition that goes into the igntion switch i was just thinking a push button would ve been cheaper then going to buy a whole new ignition.


You would have to tape the key, or the transponder chip, to the side of the imoblisor transponder to get that part to work. You would have to have a switched ignition live, and a spring loaded "starter" switch.

All very easy to do, however, you would have no security and  I doubt any insurer would be prepared to cover you for theft, and if you didn't tell them and they found out ..........  :(
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106886
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: how to wire a push button start
« Reply #4 on: 25 July 2011, 18:26:21 »
You would still need to have some kind of switch to turn 12v on and off. Might be easier to fix it, unless you are doing it for style purposes...
Logged
Grumpy old man

AjOmega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Cali
  • Posts: 49
    • View Profile
Re: how to wire a push button start
« Reply #5 on: 25 July 2011, 19:57:53 »
Yea i dont wont my car to get stolen so im just going to get the ignition replaced even tho its 200 U.S dollars lol  :y
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: how to wire a push button start
« Reply #6 on: 25 July 2011, 20:00:58 »
Would have thought it would be cheaper to get a barrell & key from a breaker :-?
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

AjOmega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Cali
  • Posts: 49
    • View Profile
Re: how to wire a push button start
« Reply #7 on: 25 July 2011, 21:37:00 »
where would be the best place to get a barrel and key
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106886
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: how to wire a push button start
« Reply #8 on: 26 July 2011, 15:43:05 »
No idea where to get one your side of the Atlantic, sorry.
Logged
Grumpy old man

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: how to wire a push button start
« Reply #9 on: 26 July 2011, 16:20:12 »
Quote
where would be the best place to get a barrel and key
Bit costly. Don`t know whether the omega barrell is the same, if so, one could be shipped from the UK I imagine
http://cgi.ebay.com/ebaymotors/1997-2001-CATERA-IGNITION-SWITCH-ASSY-USED-_W0QQcmdZViewItemQQfitsZModelQ3aCateraQQhashZitem5199eaa8bfQQitemZ350474643647QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

AjOmega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Cali
  • Posts: 49
    • View Profile
Re: how to wire a push button start
« Reply #10 on: 26 July 2011, 17:11:11 »
Thanks im going to consider buying that. its exactly what i need :y
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: how to wire a push button start
« Reply #11 on: 26 July 2011, 17:15:50 »
Quote
Thanks im going to consider buying that. its exactly what i need :y
It says "best offer" so good luck :y Unfortunately for you it wouldn`t be more than about $20-25 secondhand in the UK
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

AjOmega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Cali
  • Posts: 49
    • View Profile
Re: how to wire a push button start
« Reply #12 on: 26 July 2011, 17:27:58 »
Will I need to take a trip to the Uk for all the parts i need. :)
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: how to wire a push button start
« Reply #13 on: 26 July 2011, 17:29:50 »
Quote
Will I need to take a trip to the Uk for all the parts i need. :)
Depends on what you needed ;D ;D ;D now, if you were in Orlando come Sept/Oct ::)
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

AjOmega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Cali
  • Posts: 49
    • View Profile
Re: how to wire a push button start
« Reply #14 on: 26 July 2011, 17:51:26 »
lol alright thanks for the help. :y
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.035 seconds with 22 queries.