Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bullet]

can anyone tell me if the swap from ellipsoid headlights to zenons is a straight swap, i have sourced a set of zenons and would like to swap mine over but not sure if i need anything else to make them work...cheers guys

[RobG]

You need the plugs from the ballast units with a short piece of loom. Splice the two wires from them into the same colour wires on your dipped beam plug (yellow & brown). Fit your level motors to the new lights (plug & play). Job done. Then you need to source some headlight washers as it`s most probable that the MOT post Jan. 2012 will require these on HID`s
Pic of one of the plugs needed

[Bullet]

thanks for that rob i got the complete light units with the ballast units i think so they will have that plug on wont they...i havent looked yet lol, mot due nov 11 so i might have a little longer to source those washers..might just leave swap till after mot just to be safe, thanks for the heads up 

[RobG]

thanks for that rob i got the complete light units with the ballast units i think so they will have that plug on wont they...i havent looked yet lol, mot due nov 11 so i might have a little longer to source those washers..might just leave swap till after mot just to be safe, thanks for the heads up 

Unlikely,

[Bullet]

oh dear, where would i be able to source these if mine units dont have them, not sure of scrappys in my area, not been up here long enough to find them lol ;0)

[RobG]

oh dear, where would i be able to source these if mine units dont have them, not sure of scrappys in my area, not been up here long enough to find them lol ;0)

Got a pair here if you end up needing some

[Bullet]

cheers fella much appreciated ya have to let me know how much and how to pay just in case, top man deffo beers on me 

[RobG]

cheers fella much appreciated ya have to let me know how much and how to pay just in case, top man deffo beers on me 

Drop me a PM if or when you need `em

[Bullet]

ok mate will do can you hold em i will check my zenons tomorrow and let you know for deffo....thanks again ;0)

[RobG]

ok mate will do can you hold em i will check my zenons tomorrow and let you know for deffo....thanks again ;0)