Topic: Exhaust manifold wanted for 2.0L on 2000W plate (Read 1229 times)

BgBLizard · « **on:** 18 October 2011, 13:25:28 »

Hi All

If this could be moved it would really be appreciated.

I am after a exhaust manifold for my sons 2.0L facelift on a 2000W plate if any one could help.

Cheers

twiglet · « **Reply #1 on:** 18 October 2011, 19:19:16 »

I've got a 2001MY 2.2 exhaust manifold here, not sure if it's the same though. Don't suppose you have a part number? $:-\$

BgBLizard · « **Reply #2 on:** 18 October 2011, 19:59:29 »

Im sure it will be OK thanks

you ok to post?

Twiglet

TheBoy · « **Reply #3 on:** 18 October 2011, 20:00:40 »

Does 2l have SAI on, if so, likely that plumbs into manifold, and doubt 2.2 has that...

RobG · « **Reply #4 on:** 18 October 2011, 20:08:33 »

Quote from: TheBoy on 18 October 2011, 20:00:40

Does 2l have SAI on, if so, likely that plumbs into manifold, and doubt 2.2 has that...

Correct on both

BgBLizard · « **Reply #5 on:** 18 October 2011, 20:23:49 »

We had to remove a pipe with two small connections to the manifold so that would be the SAI.

Manifold is not here at the moment so cannot check PN but asked this qustion before and got this answer

http://www.omegaowners.com/forum/index.php?topic=94072.msg1178849#msg1178849

RobG · « **Reply #6 on:** 18 October 2011, 20:27:50 »

If fitting a 2.2 manifold, strip out all the SAI system but leave the solenoid valve with it`s electrical connection in place.

BgBLizard · « **Reply #7 on:** 18 October 2011, 20:54:43 »

Thanks Rob

Possible to use a resistor instead of solenoid to fool the ecu.

BgBLizard · « **Reply #8 on:** 19 October 2011, 18:41:08 »

Thanks twiglet

Tried to contact you but go this "PM could not be sent to 'twiglet' as their inbox is full!"

twiglet · « **Reply #9 on:** 19 October 2011, 19:27:25 »

Try again mate, just had a clear out

News:

Author Topic: Exhaust manifold wanted for 2.0L on 2000W plate (Read 1229 times)

BgBLizard

Exhaust manifold wanted for 2.0L on 2000W plate

twiglet

Re: Exhaust manifold wanted for 2.0L on 2000W plate

BgBLizard

Re: Exhaust manifold wanted for 2.0L on 2000W plate

TheBoy

Re: Exhaust manifold wanted for 2.0L on 2000W plate

RobG

Re: Exhaust manifold wanted for 2.0L on 2000W plate

BgBLizard

Re: Exhaust manifold wanted for 2.0L on 2000W plate

RobG

Re: Exhaust manifold wanted for 2.0L on 2000W plate

BgBLizard

Re: Exhaust manifold wanted for 2.0L on 2000W plate

BgBLizard

Re: Exhaust manifold wanted for 2.0L on 2000W plate

twiglet

Re: Exhaust manifold wanted for 2.0L on 2000W plate