Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: 1 2 3 [4]  All   Go Down

Author Topic: My 2.6 Rocker Gasket Change  (Read 4149 times)

0 Members and 3 Guests are viewing this topic.

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5532
    • Mazda MPV
    • View Profile
Re: My 2.6 Rocker Gasket Change
« Reply #45 on: 23 October 2011, 20:57:43 »
Quote from: Deuce on 23 October 2011, 20:44:05
Quote from: Elite Pete on 23 October 2011, 20:40:48
You need to remove the black Eco Tec piece as there are 4 holes in there to clean as well ;)

I tried to lever it up, but it wouldn't budge and I didn't want to force it. I've seen the thread on how to do a 2.5 V6 and wondered if the 2.6 Eco Tec part came off the same or not?
IIRC there is a thin plastic cover clipped onto the main plastic breather unit. The cover has to be prised off before you can get to the bolt that holds the breather unit on.
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

albitz

  • Guest
Re: My 2.6 Rocker Gasket Change
« Reply #46 on: 23 October 2011, 21:12:35 »
Yep. :y............one torx bolt underneath it.
Logged

Deuce

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Colchester
  • Posts: 160
    • Omega 2.6 CDX
    • View Profile
Re: My 2.6 Rocker Gasket Change
« Reply #47 on: 23 October 2011, 21:24:10 »
Ok Thank you.

I'll try getting it off again  :y

Just ordered the V6 cambelt DVD and will sort out a locking tool.
Logged

Deuce

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Colchester
  • Posts: 160
    • Omega 2.6 CDX
    • View Profile
Re: My 2.6 Rocker Gasket Change
« Reply #48 on: 30 October 2011, 15:56:10 »
Got my DVD and it is very good, thanks OOF.

Won a timing locking tool kit from the Bay and waiting for it's arrival.

Got the ECO bridge unit apart this weekend and cleaned up the holes underneath.



Nice and clean again.



I want to fit a new rubber grommet thing over that part I cleaned as the exsisting one was sqaushed on one side and a part of it seems to be missing. I want the o rings as well, if I am going to take it apart again I might as well change them too.

What do I ask for at VX?
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39732
    • ML350 TDM SmartRoadster
    • View Profile
Re: My 2.6 Rocker Gasket Change
« Reply #49 on: 30 October 2011, 18:21:16 »
Quote from: Deuce on 30 October 2011, 15:56:10
....
What do I ask for at VX?

They'll get their screen up with EPC on it, and you point to what you want & say I'll have 1 of those & 4 of those please!   :y :y :y

I think the relevant part number are in the guide to cleaning the breathers.  :-\
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33984
  • Git!
    • View Profile
Re: My 2.6 Rocker Gasket Change
« Reply #50 on: 30 October 2011, 18:50:08 »
Are we not reading the guides?

The breather cleaning one lists the part numbers and tell you ahd to get the breather bridge off etc......
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39732
    • ML350 TDM SmartRoadster
    • View Profile
Re: My 2.6 Rocker Gasket Change
« Reply #51 on: 30 October 2011, 21:30:25 »
Quote from: Marks DTM Calib on 30 October 2011, 18:50:08
Are we not reading the guides?

..........

Give him a break, he's only been here for 53 posts  ;) ;) ;)
Logged

Deuce

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Colchester
  • Posts: 160
    • Omega 2.6 CDX
    • View Profile
Re: My 2.6 Rocker Gasket Change
« Reply #52 on: 01 November 2011, 08:10:11 »
Cheers guys.

I didn't think the 2.5 engine would have the same numbers as the 2.6, so asked the question here.

Logged
Pages: 1 2 3 [4]  All   Go Up
« previous next »
 

Page created in 0.019 seconds with 17 queries.