Topic: What size LPG pipe to use ? (Read 824 times)

Ken T · « **on:** 10 November 2011, 20:44:39 »

I am just compiling a shopping list of bits to finish my LPG instal, and have a query. My Reducer is a V-SGI with an 8mm inlet, the tank I was looking at has a Tomassete multivalve with an 8mm inlet and 6mm outlet. What is the best pipe to use for the main run, 6mm or 8mm ?.

Ken

Lazydocker · « **Reply #1 on:** 10 November 2011, 21:16:04 »

If this is for a V6 then you really need 8mm feed pipe to make sure you can get sufficient fuel through

Which means you need a 8mm feed on the multivalve too

Ken T · « **Reply #2 on:** 10 November 2011, 21:43:48 »

Thanks Paul,
looks like I got to do more research into which multivalve to get. They don't seem to publish inlet /outlet sizes for these, so I'll have to call Tinley in the morning and see if he got any.

Its only a small V6

Ken

Lazydocker · « **Reply #3 on:** 10 November 2011, 21:56:37 »

Quote from: Ken T on 10 November 2011, 21:43:48

Thanks Paul,
looks like I got to do more research into which multivalve to get. They don't seem to publish inlet /outlet sizes for these, so I'll have to call Tinley in the morning and see if he got any.

Its only a small V6

Ken

You might get away with 6mm but I wouldn't want to risk it

ISTR That Tomassetto ones have an 8mm outlet $:-\$ $:-\$

Ken T · « **Reply #4 on:** 10 November 2011, 22:05:01 »

I called Tinley today and that's what he said, maybe cause I hadn't specified the tank size I was after he gave a small one.

I want to get this install finished asap, fed up putting in a fortune in petrol every week.

Got any cheap petrol ?.

Ken

News:

Author Topic: What size LPG pipe to use ? (Read 824 times)

Ken T

What size LPG pipe to use ?

Lazydocker

Re: What size LPG pipe to use ?

Ken T

Re: What size LPG pipe to use ?

Lazydocker

Re: What size LPG pipe to use ?

Ken T

Re: What size LPG pipe to use ?