Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[omegafin]

New CID to my 2.5TD 2000 FL need paired with Tech2, Car pass is lost so do I need any codes from Car pass or is
only display index code needed ? How I change display language and Navigator's speech ?
Do I gat any Car Pass codes by Tech2 ?

[zirk]

Guessing your need to re order your car pass from your reg through a dealer

[Andy B]

New CID to my 2.5TD 2000 FL need paired with Tech2, Car pass is lost so do I need any codes from Car pass or is
only display index code needed ? How I change display language and Navigator's speech ?
Do I gat any Car Pass codes by Tech2 ?

Jamie aka The Boy will advise, but I don't think they need or use a code because they're paired to each other. Your old units will need 'divorcing' from each other with Tech II before  you 'marry' your new units. 

[omegafin]

Does radio, cd and navi really be depaided before pairing new cid
My old cid is totally dead so it won't respond and can't be depaired ?

[Andy B]

Does radio, cd and navi really be depaided before pairing new cid
My old cid is totally dead so it won't respond and can't be depaired ?

Wait for Jamie or DaveDND 

[zirk]

As far as Im aware if your old CID is furbed the it can just be removed, your new CID which should be in delivery mode can be paired to the HU via your Car Pass.

[omegafin]

cid is brand new so it is in delivery mode.

[Dave DND]

As long as the original CID was working in the car prior to going wrong, and the two CID`s are the same model / version, we can probably extract and copy the data over from the old one to the new one if you sent them both to me, which means you may not actually need a tech2 session at all - it would be plug and play.

Give me a yell if this is the case and we can discuss further.

[omegafin]

Dave , thanks for your offer, but chips are toasted due to some idiot's ( not me ) repairing attempt, so tech2 programming is needed , i am asking because Dealer Don't seem to know how to proceed excatly. ??
( but they can try ) ??

[Dave DND]

What has been done to "toast" the chips ?

Chips Reprogrammed in any way, removed from the board? Are legs missing ?

Just because the unit is fried, we still may be able to recover something from it, but would need details of exactly what had been done to destroy it

 

[omegafin]

wrong polarity or overvoltage ?? , regulator was passed too etc , anyway i don't have it anymore (wasted) took longtime to get new cid.

[Dave DND]

Car Pass / Pairing code and a Tech2 session then

 

[omegafin]

Thanks !,

So I need:

1. Security code from Car Pass.

2. CID's pairing code. Must the pairing code be the same than in old CID or Can I
     change the code according to new tires ? , And later if tire size changes new code must be
     programmed again by Tech2 ?.

3. Display language is programmed by tech2 too ?

4. Navigator's voice is set by tech2 and then I install new navi update from cd and then
new maps fom Road Mad cd ?

5. now everything should be OK or did I miss something ?

[tunnie]

Thanks !,

So I need:

1. Security code from Car Pass.

2. CID's pairing code. Must the pairing code be the same than in old CID or Can I
     change the code according to new tires ? , And later if tire size changes new code must be
     programmed again by Tech2 ?.

3. Display language is programmed by tech2 too ?

4. Navigator's voice is set by tech2 and then I install new navi update from cd and then
new maps fom Road Mad cd ?

5. now everything should be OK or did I miss something ?

No that can be done via the head unit, but it can be set with tech2 so that it defaults to english if you loose power again. 

[TheBoy]

You need the pairing code used to pair the NCDC, CDC3, Telematics (if applicable) and CID.  If it was factory fitted, and unmolested, this will be on the car's carpass.  However, I doubt it was factory fitted - but can check from registration.

If you don't have pairing code, then, assuming it was all properly paired beforehand, I can decode it, and then pair in new CID.