Topic: injector (Read 948 times)

jigger · « **on:** 22 January 2012, 12:32:38 »

Hi all
Has anyone had this prob 2.5td No 4 injector leaking around the black sensor ! and no it;s not the pipes,

freecall666 · « **Reply #1 on:** 22 January 2012, 21:18:05 »

can do that on most if seal in side has gone. fuel finds it way out.

hoofing it · « **Reply #2 on:** 22 January 2012, 21:22:45 »

Is the fuel leak at the bottom of the black bit or where the injector screws into the cylinder head.

hoofing it · « **Reply #3 on:** 22 January 2012, 21:27:23 »

Just seen your posting from earlier on today.
Have you taken the injector to bits and rebuilt it recently.
Oh and don't damage the wire.

jigger · « **Reply #4 on:** 22 January 2012, 21:38:26 »

At the bottom of the black bit, have removed it now & spit it down ! should there be any seal on the thread IE the top half

Now put it back in ges wot OK for 5 min,s, warmed up & leaking againe

Thanks
jigger

hoofing it · « **Reply #5 on:** 22 January 2012, 21:46:37 »

It sounds like you have put the cap that sits on top of the pin in the wrong way round.
Heres a link that might help.
The bit im talking about is between the pin and the spring above it on picture 6.
In the picture the face you can see faces down to the nozzle
http://www.omegaowners.com/forum/index.php?topic=90623.0

jigger · « **Reply #6 on:** 22 January 2012, 22:07:58 »

You could be right ,It has always had a weep & it could have been a recon !! Have it out tomoz and let you know

I put it back the way it came out

Thanks
Jigger

News:

Author Topic: injector (Read 948 times)

jigger

injector

freecall666

Re: injector

hoofing it

Re: injector

hoofing it

Re: injector

jigger

Re: injector

hoofing it

Re: injector

jigger

Re: injector