Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Joiner]

First off, just went and tried to turn this display on with the ignition on and no joy, nothing at all.

Webby, mine is the CCR 2006 as shown in the first post. Ive also taken a tape and measured the hole centres and they are around 85mm ctrs if that helps.

[RobG]

I tried everything to get mine out including Allen keys  but wouldn't come out.

Have a go but if it won't come out I note you're in Bedford... I'm in Northampton if you want to pop to my work I'll get the stereo out for you!  PM me if you want to

I'll give a try Webby but if it comes to it I might just take you up on your offer

Without trying to state the obvious, have you checked it's actually switched on by pressing the top left or top right rotary knobs?

I think I have but I'm going to check to make sure

No probs. I'll take them to work with me tomorrow and I get OOF access at work so just PM tomorrow if you want to come up. If not no worries

Might just be worth checking mine will work on yours though first....

I have the two ''double prong'' removers to remove my ''2005''. Are these the right ones for your stereo?

[Webby the Bear]

First off, just went and tried to turn this display on with the ignition on and no joy, nothing at all.

Webby, mine is the CCR 2006 as shown in the first post. Ive also taken a tape and measured the hole centres and they are around 85mm ctrs if that helps.

Ok.

Can someone confirm these will fit in Joiners' holes? 

[Webby the Bear]

Sorry Rob. Couldn't type fast enough 

Then as said Joiner, just PM me tomorrow if you need to pop up 

[Joiner]

First off, just went and tried to turn this display on with the ignition on and no joy, nothing at all.

Webby, mine is the CCR 2006 as shown in the first post. Ive also taken a tape and measured the hole centres and they are around 85mm ctrs if that helps.

Ok.

Can someone confirm these will fit in Joiners' holes? 

Ooooohhhh Matron

[RobG]

and make sure you have the radio code.
Does everything else work

[Webby the Bear]

and make sure you have the radio code.
Does everything else work

I didn't have to input my radio code again. But it says on the guide to have it so best do just in case

[RobG]

and make sure you have the radio code.
Does everything else work

I didn't have to input my radio code again. But it says on the guide to have it so best do just in case

Been "disabled" then

[Webby the Bear]

and make sure you have the radio code.
Does everything else work

I didn't have to input my radio code again. But it says on the guide to have it so best do just in case

Been "disabled" then

You mean the security code has been disabled?

[Webby the Bear]

Joiner, I have bought my tool in to work 

If you do want to come up just PM me and I can help you do it If not no worries

I am lunching at 1pm so if you do come up could it be 1?

Cheers

[RobG]

and make sure you have the radio code.
Does everything else work

I didn't have to input my radio code again. But it says on the guide to have it so best do just in case

Been "disabled" then

You mean the security code has been disabled?

Yep