Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: safe puncture repairs.  (Read 1854 times)

0 Members and 2 Guests are viewing this topic.

albitz

  • Guest
safe puncture repairs.
« on: 02 February 2012, 20:25:34 »
Seem to remember a rule about the puncture must be a certain distance from the edge of the tread, or is that just on bikes ?  :-\
Tia for any info. :y
Logged

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Re: safe puncture repairs.
« Reply #1 on: 02 February 2012, 20:29:20 »
I was told repairs can be made to the treaded are but certainly not on the walls
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

albitz

  • Guest
Re: safe puncture repairs.
« Reply #2 on: 02 February 2012, 20:32:58 »
This one is right on the edge of the tread,so may be borderline.Might be best to ask at tyre fitting place I suppose. :y
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: safe puncture repairs.
« Reply #3 on: 02 February 2012, 20:38:41 »
Quote from: Albs on 02 February 2012, 20:32:58
This one is right on the edge of the tread,so may be borderline.Might be best to ask at tyre fitting place I suppose. :y
Here you go Albs, another link ;D ;D
http://www.etyres.co.uk/glossary-tyre-terms?term=repairable-area
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

zirk

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Epping Forest
  • Posts: 11447
  • 3.2 Manual Special Saloon ReMapped and LPG'd and
    • 3.2 Manual Special Estate
    • View Profile
Re: safe puncture repairs.
« Reply #4 on: 02 February 2012, 20:39:06 »
Most Tyre places around here wont do puncture repairs anymore, just say its furbed mate, new Tyre or worst case Part Worn, which has probably been repaired by them.

 >:( >:(
Logged

rob in gib

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Plymouth
  • Posts: 584
    • Jaguar S type 3.0
    • View Profile
Re: safe puncture repairs.
« Reply #5 on: 02 February 2012, 20:42:47 »
The standard tyre repair is made using a mushroom shaped combination plug/patch

the patch part must sit flat on the inside of the tyre so if hole is close to or on shoulder then i would say no to a repair.

If repair garage is any good they will have a wall chart giving tyre sizes and mearsurable areas of safe repair.

if the tyre has good tread and worth spending some money on then a specialist repair is possible, this involves sending the tyre away and a hot cured rubber repair applied.

HTH
Rob
Logged
Just chilling in the sun. I wish back in the rain like everybody else

albitz

  • Guest
Re: safe puncture repairs.
« Reply #6 on: 02 February 2012, 20:43:45 »
Read your link Rob. Looks like its breaked. A nice Michelin as well (at least TB will be happy,one less Michelin on an Omega) ::) :D
Logged

cem_devecioglu

  • Guest
Re: safe puncture repairs.
« Reply #7 on: 02 February 2012, 20:49:25 »
Quote from: Albs on 02 February 2012, 20:43:45
Read your link Rob. Looks like its breaked. A nice Michelin as well (at least TB will be happy,one less Michelin on an Omega) ::) :D

bad news.. but imo dont take any risk..
Logged

Lazydocker

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Woodbridge, Suffolk
  • Posts: 18848
  • Constantly Bullied by a certain Admin
    • View Profile
Re: safe puncture repairs.
« Reply #8 on: 02 February 2012, 21:52:05 »
Not a fan of repairs myself, although needs must sometimes ::)
Logged
Whatever it is... I didn't do it

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39884
    • ML350 TDM SmartRoadster
    • View Profile
Re: safe puncture repairs.
« Reply #9 on: 02 February 2012, 21:58:12 »
Quote from: rob in gib on 02 February 2012, 20:42:47
....

if the tyre has good tread and worth spending some money on then a specialist repair is possible, this involves sending the tyre away and a hot cured rubber repair applied.

HTH
Rob

A vulcanised repair.  ;) ;)
There's a place local to Nigel Lang, Bolton, that'll do it on site, so other places must do similar.  :y :y
Logged

feeutfo

  • Guest
Re: safe puncture repairs.
« Reply #10 on: 02 February 2012, 23:45:18 »
IME the main concern seems to be getting the patch to sit flat to the inner tread. If there's an angle, like the sidewall, within the patch area it simply won't hold...


And since when did Albs start forking out for Michelins oh his car...btw...?  :o
« Last Edit: 02 February 2012, 23:47:00 by chrisgixer »
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.012 seconds with 17 queries.