Topic: ignition (Read 1901 times)

greenman · « **on:** 15 February 2012, 14:42:16 »

Looking forcomplete ignition switch for facelift 2.2.From key up to connector.Can admin.please move.

greenman · « **Reply #1 on:** 15 February 2012, 19:29:00 »

Amendment!
Just need ignition barrel and key(2 if possible.

Andy B · « **Reply #2 on:** 15 February 2012, 19:35:58 »

Why? $:-\$
You could always build a barrel to fit your existing key(s) ..... that would retain one key for all the car.

greenman · « **Reply #3 on:** 15 February 2012, 19:47:59 »

The retainer on the barrel has snapped but if only need the barrel that,ll do.

Andy B · « **Reply #4 on:** 15 February 2012, 19:52:08 »

The retainer on the barrel has snapped but if only need the barrel that,ll do.

I'd swap the original barrel's tumblers into A N Other to keep the original key.

greenman · « **Reply #5 on:** 15 February 2012, 19:56:33 »

Looked at the "how to".seems easy enough.Thing is has onyone got a barrel?