1
Omega General Help / Re: engine code
« on: 08 February 2010, 19:48:38 »
that will do its for a new tax book
- 22 July 2025, 05:51:35
- Welcome, Guest
News:
Welcome to OOF
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Omega General Help / engine code
« on: 08 February 2010, 19:35:19 »
where do i find this its on a 1996 30l cheers
3
Omega General Help / Re: engine management
« on: 07 February 2010, 19:25:36 »
she done the paper clip test and said it was 14 @57
4
Omega General Help / engine management
« on: 07 February 2010, 19:07:04 »
is there anyway of clearing faults on a 1996 30l
5
Omega General Help / Re: omega 30l
« on: 31 January 2010, 18:28:32 »
where is the diganostic plug cheers
6
Omega General Help / omega 30l
« on: 30 January 2010, 21:27:45 »
problem when the car warms up or if u rev it to quick it miss
fires should i change the plugs & leads to start off with
cheers
fires should i change the plugs & leads to start off with
cheers
7
Omega General Help / mv6
« on: 18 December 2007, 18:22:12 »
i have a 1999 mv6 where is the engine number located as i need to order parts 
8
Omega General Help / Re: cylinder heads
« on: 11 December 2007, 23:19:04 »Quote
Just read all the thread again.cheers
Get the head measured/skimmed (if you still have it) and replace/rebuild as required.
Heads rarely go on the V6 but the do sometimes..... generally its an oil cooler fault, not a head gasket one...
If the engine is down to its brass buttons as it appears to be, do the oil cooler at the same time. Will probably save troubles in time to come and add about £100 or less to the bill......
9
Omega General Help / Re: cylinder heads
« on: 11 December 2007, 23:15:00 »Quote
OK. Lets get some ground cleared.....
You have an MV6 with a head removed from the engine.
You got the head or are you looking to obtain one?
If the former, rebuild as suggested.
If the latter, post an add in parts wanted then put it back together as per the howtoo.....
Sorry to be blunt but, as said, we need info in order to return the favour and give info to be able to help you out. Good as we are, we are not psycic....
hi i got the car to day the cylinder head is in the boot in a box the head gasket was away the guy who had it b4 me took it apart
Why was the head removed in the first place??
10
Omega General Help / Re: cylinder heads
« on: 11 December 2007, 23:06:05 »Quote
why is it off, whats the percieved problem?the head was off when i got it headgasket was away
11
Omega General Help / Re: cylinder heads
« on: 11 December 2007, 23:03:32 »Quote
http://www.omegaowners.com/forum/YaBB.pl?num=1187928695that the way i got it mv6 r hard to get in belfast
No pics on the thread but its how it comes apart and goes together again.....
12
Omega General Help / Re: cylinder heads
« on: 11 December 2007, 22:43:05 »Quote
the head is in bits any pic would help driver sideQuotehi bought a 1999 mv6 with the cylinder head off would any one have any info or pic
what sort of info or pics are you after?
i take it you want engine shots but just trying to narrow it down a bit so as to help out
14
Omega General Help / cylinder heads
« on: 11 December 2007, 22:20:15 »
hi bought a 1999 mv6 with the cylinder head off would any one have any info or pic 
15
General Discussion Area / temp
« on: 23 January 2008, 20:01:12 »
whats the normal running temp on a 99 mv6
Pages: [1] 2