Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1] 2  All   Go Down

Author Topic: Trying to Replace 2.5 V6 Waterpump  (Read 4137 times)

0 Members and 1 Guest are viewing this topic.

Shaarky

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bedfordshire
  • Posts: 6
    • Omega 2.5 V6
    • View Profile
Trying to Replace 2.5 V6 Waterpump
« on: 21 June 2012, 18:53:10 »
Hi waterpump broke and i need to replace it. i have removed three screws but it does not appear to want to come out. Trying to do this without removing the cambelt cover so its difficult to see whats going on.
Have i released all the screws? any reason why the pump does not want to come out? i have tried hitting it but it doesn't seem to move at all, and i dont want to damage anything other than the faulty pump.

Any advice greatly appeciated!
Logged

allen25

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Worcestershire
  • Posts: 226
    • Omega 2.6 V6 2001
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #1 on: 21 June 2012, 19:22:19 »
I've done mine on the 2001 V6 but I had the timing belt covers off. The water pump generally needs tapping with a rubber or protected hammer,  sometimes needs a bit of a whack. Oil the seal sealing ring before refitting and clean the block well before offering up the new pump. I'm going to get slated here, happens every time I respond to anything! Cheers!
Logged

noel

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • frome somerset
  • Posts: 1607
  • i feel the need for speed
    • 02 omega 2.6 v6 cdx auto
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #2 on: 21 June 2012, 19:26:05 »
Quote from: allen25 on 21 June 2012, 19:22:19
I've done mine on the 2001 V6 but I had the timing belt covers off. The water pump generally needs tapping with a rubber or protected hammer,  sometimes needs a bit of a whack. Oil the seal sealing ring before refitting and clean the block well before offering up the new pump. I'm going to get slated here, happens every time I respond to anything! Cheers!
no slating from me thats sounds like practicle advice to me
Logged
oh well that's another day done

noel

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • frome somerset
  • Posts: 1607
  • i feel the need for speed
    • 02 omega 2.6 v6 cdx auto
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #3 on: 21 June 2012, 19:28:44 »
Quote from: Shaarky on 21 June 2012, 18:53:10
Hi waterpump broke and i need to replace it. i have removed three screws but it does not appear to want to come out. Trying to do this without removing the cambelt cover so its difficult to see whats going on.
Have i released all the screws? any reason why the pump does not want to come out? i have tried hitting it but it doesn't seem to move at all, and i dont want to damage anything other than the faulty pump.

Any advice greatly appeciated!
may find it easier to remove timing cover more scpoe to see whats going on,& less chance of damaging timing cover HTH :y
Logged
oh well that's another day done

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #4 on: 21 June 2012, 20:10:18 »
Remove cam belt cover.
Whack hard with a good sized copper hammer - may need a couple of hard whacks - will then probably fly off  :y
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

Shaarky

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bedfordshire
  • Posts: 6
    • Omega 2.5 V6
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #5 on: 21 June 2012, 20:19:37 »
thx Noel and allen25  :)
i did start to remove the timing belt cover, but it didnt look as if it would come out without taking a lot of stuff off. I tried removing the tensioner pulley and some electrical leads, but it was still pretty wedged in, so i decided to persevere with it loose.
i guess i just wanted to double check there was nothing other than the 3 screws i removed, holding the pump in place, before i continued hitting it to try and release it.
if there is an easy way of getting rid of the timing belt cover, i'd be glad to hear how to do it, it would certainly make this a lot easier.
Logged

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #6 on: 21 June 2012, 20:24:16 »
Only takes about half an hour to get cam belt cover off mate  :y
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

Shaarky

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bedfordshire
  • Posts: 6
    • Omega 2.5 V6
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #7 on: 21 June 2012, 21:17:39 »
KK thanks Dbug.
i'll look to see if i can find out what needs removing to get it out. Looked tight behind power steering pump, and a load of harnesses attached too.
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #8 on: 21 June 2012, 21:21:56 »
Quote from: Shaarky on 21 June 2012, 21:17:39
KK thanks Dbug.
i'll look to see if i can find out what needs removing to get it out. Looked tight behind power steering pump, and a load of harnesses attached too.
Slacken bolts on water pump pulley, remove aux belt, remove tensioner, water pump pulley, power steering pulley and crank pulley then cam belt cover off
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Shaarky

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bedfordshire
  • Posts: 6
    • Omega 2.5 V6
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #9 on: 21 June 2012, 21:44:07 »
Thx RobG looks like removing the power steering and crank pulley will do for me then :)
Logged

Webby the Bear

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northampton
  • Posts: 12752
    • 2000 (W Reg.) 2.5 V6 CD
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #10 on: 21 June 2012, 21:53:32 »
if your already at the point where youve got to the water pump and removed te three screws its easy from there. 15Mm on the aux belt tensioner. Turn clock wise. Pull belt off. Release tension. Slackened off pullies. Undo four cover screws. Your there. I love knocking the water pump off. Last time i didnt drain the coolant on purpose as i love to see the block drain. Weirdness i know :-)
Logged
RIP Paul Lovejoy

noel

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • frome somerset
  • Posts: 1607
  • i feel the need for speed
    • 02 omega 2.6 v6 cdx auto
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #11 on: 21 June 2012, 21:56:48 »
Quote from: Webby the Bear on 21 June 2012, 21:53:32
if your already at the point where youve got to the water pump and removed te three screws its easy from there. 15Mm on the aux belt tensioner. Turn clock wise. Pull belt off. Release tension. Slackened off pullies. Undo four cover screws. Your there. I love knocking the water pump off. Last time i didnt drain the coolant on purpose as i love to see the block drain. Weirdness i know :-)
is it a fettish of yours  ;D ;)
Logged
oh well that's another day done

Big_Al

  • Guest
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #12 on: 21 June 2012, 21:59:18 »
Quote from: Webby the Bear on 21 June 2012, 21:53:32
if your already at the point where youve got to the water pump and removed te three screws its easy from there. 15Mm on the aux belt tensioner. Turn clock wise. Pull belt off. Release tension. Slackened off pullies. Undo four cover screws. Your there. I love knocking the water pump off. Last time i didnt drain the coolant on purpose as i love to see the block drain. Weirdness i know :-)


You are starting to worry me a bit now Webby.  ;D ;D ;D ;D 
Logged

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #13 on: 21 June 2012, 22:08:51 »
Quote from: Essex Big Al on 21 June 2012, 21:59:18
Quote from: Webby the Bear on 21 June 2012, 21:53:32
if your already at the point where youve got to the water pump and removed te three screws its easy from there. 15Mm on the aux belt tensioner. Turn clock wise. Pull belt off. Release tension. Slackened off pullies. Undo four cover screws. Your there. I love knocking the water pump off. Last time i didnt drain the coolant on purpose as i love to see the block drain. Weirdness i know :-)


You are starting to worry me a bit now Webby.  ;D ;D ;D ;D

Don't knock it till you've tried it Al  ;)
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

Shaarky

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Bedfordshire
  • Posts: 6
    • Omega 2.5 V6
    • View Profile
Re: Trying to Replace 2.5 V6 Waterpump
« Reply #14 on: 22 June 2012, 05:15:05 »
Hmmm i wonder. Should i re-fill the system just before hitting this pump? i'd hate to lose out on this once in a lifetime experience... ;D ;D
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.017 seconds with 17 queries.