Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

X30xe,ar35
HID? If you mean xenon,that I don't have.

051 for 15 and 17" wheels
055 for 225/55/16 wheels

[furion]

I have put pin32 to 0(ground) but still the tech2 said no comunication with vehicle.
I have checked that the wiering is ok

Should the tech2 speak to the CID througe diagnostic pin 8 to pin 14 (32 pol cid), or should it go througe ncdr by pin 7 on the diagnostic?

Can high + Can low is just betwene ncdr and Cid??

[furion]

I have put pin32 to 0(ground) but still the tech2 said no comunication with vehicle.
I have checked that the wiering is ok

Should the tech2 speak to the CID througe diagnostic pin 8 to pin 14 (32 pol cid), or should it go througe ncdr by pin 7 on the diagnostic?

Can high + Can low is just betwene ncdr and Cid??

and should pin 8 and 9 in in 32pol cid be removed,can these cause any trouble if i leave them in?

[TheBoy]

Purely from memory, I thought CID was on diag pins 6...

[furion]

yes i saw that in another thred,my MID is on pin8,should a direct wiere from CID pin14 to pin6 on diagnostic do the trick?

[furion]

nope that didn`t work.
according to my wiereschmatic for a facelift,Diagnostic is on pin8 - pin14(tid,mid,gid and cid)
Do anyone have a wiere schematic from a 10pol to a 20pol?
from CID pin 8 or 9 goes to pin17 in my 10pol.but from there its empty into my 20pol,anyone knows if this should be like that or do i miss this wiere?

[furion]

Dosn`t CID suport Check control?
Do I have to disable that?,if so do I have to do that when the old MID is still in the car?

[TheBoy]

Dosn`t CID suport Check control?
Do I have to disable that?,if so do I have to do that when the old MID is still in the car?

When you program the CI on the CID, you have the option to disable certain functions, check control being one of them.

[TheBoy]

nope that didn`t work.
according to my wiereschmatic for a facelift,Diagnostic is on pin8 - pin14(tid,mid,gid and cid)
Do anyone have a wiere schematic from a 10pol to a 20pol?
from CID pin 8 or 9 goes to pin17 in my 10pol.but from there its empty into my 20pol,anyone knows if this should be like that or do i miss this wiere?

Yes, my poor memory

Diags pin 8 to CID pin X34/14.  Pins 1 and 32 need to be at 0v

[furion]

then I don`t know what to do............ could it be my tech2 that is missing something?
Howe I use my tech2.¨'
1. press power
2.select  diagnos
3.select year (2001)
4.select model(have tested Astra G,Vectra B,Omega B.)
On Omega B I dont have the ncdr,only ncdc and ccrt i think)
5.select infotainment
6.select ncdr and cdc they work.
7.select GID or CID no comunication with the car.....if i chose 1998 and MID it pops right up.(with MID of course)

[furion]

Should the ncdr have diffrent index code btw? mine is 022  and code 2

[furion]

Should the ncdr have diffrent index code btw? mine is 022  and code 2

this came from a astra g,bought from germany just plug and played it.should i tell the car somthing or is it anything like that i have forgot?

[TheBoy]

In Tech2, select NCDC2013/5

[furion]

In Tech2, select NCDC2013/5

tryed but didn`t work.
i`m starting to think that there is somthing wrong with my tech 2 ..........

[furion]

Got some progress to day.
I know that the wiering is ok,we tryed a "My Naff Code Reader" and that came into the CID.But there was no posibility to change or upload anything.
So now im whondering way I cant get in with my tech2.