Topic: lost the small hose for coolant bridge (Read 1071 times)

terry paget · « **on:** 12 September 2013, 07:56:23 »

G84GNB
Reassembling the plumbing. Two pipes emerge from the coolant bridge. The larger, 15mm in diameter, takes the hose to the HBV; the smaller, a brass insert, is 7mm in diameter with a 2mm hole in the end. I cannot find the hose to put onto it. Where does it come from?

terry paget · « **Reply #1 on:** 12 September 2013, 08:09:09 »

Have found on the bench a long hose that might be the one I am looking for. It might go to the throttle box. Please confirm.

Marks DTM Calib · « **Reply #2 on:** 12 September 2013, 10:04:25 »

Yes, throttle body feed, runs along the top of the 2-4-6 head/cam cover

terry paget · « **Reply #3 on:** 12 September 2013, 13:32:10 »

Thanks. That has solved a mystery.

terry paget · « **Reply #4 on:** 13 September 2013, 09:06:34 »

I did this job following Haynes, who recommended removing oil pipes. After I had done it, someone said this was unnecessary and unwise. Is that view widely held?

Marks DTM Calib · « **Reply #5 on:** 13 September 2013, 09:11:16 »

Quote from: terry paget on 13 September 2013, 09:06:34

I did this job following Haynes, who recommended removing oil pipes. After I had done it, someone said this was unnecessary and unwise. Is that view widely held?

Yes, no need to remove the oil cooler pipes.

News:

Author Topic: lost the small hose for coolant bridge (Read 1071 times)

terry paget

lost the small hose for coolant bridge

terry paget

Re: lost the small hose for coolant bridge

Marks DTM Calib

Re: lost the small hose for coolant bridge

terry paget

Re: lost the small hose for coolant bridge

terry paget

Re: lost the small hose for coolant bridge

Marks DTM Calib

Re: lost the small hose for coolant bridge