Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: 1 2 [3]  All   Go Down

Author Topic: FAE cam sensor  (Read 6291 times)

0 Members and 2 Guests are viewing this topic.

smalt36

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • hull
  • Posts: 27
    • Omega2.2GLS
    • View Profile
Re: FAE cam sensor
« Reply #30 on: 13 November 2014, 06:56:30 »
Thanks lads will check for fuel/ spark. I thought it was gonna fire straight up as it did try the very 1st try but then it's just cranking over with no hint of firing up.
Logged

smalt36

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • hull
  • Posts: 27
    • Omega2.2GLS
    • View Profile
Re: FAE cam sensor
« Reply #31 on: 13 November 2014, 08:05:07 »
Just been to car, now thinking maybe fuel pump as can't here it when turn key just a faint click in engine bay
Logged

05omegav6

  • Guest
Re: FAE cam sensor
« Reply #32 on: 13 November 2014, 09:27:19 »
Is there any pressure at the fuel rail?

If not, is fuse 18 in the dash fuse box intact? If fuse ok, swap the two purple relays in the engine bay fuse box. One is for the fuel pump, tother is for the injectors.

Turn the ignition on again.  If you can now hear the fuel pump, then the relay was faulty... not that uncommon, if not then suspect the fuel pump...

Hth :y
Logged

smalt36

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • hull
  • Posts: 27
    • Omega2.2GLS
    • View Profile
Re: FAE cam sensor
« Reply #33 on: 13 November 2014, 11:02:44 »
Can't post pic but is fuel rail above inlet manifold? There's no pressure when push pin in on that under the black cap. Will check fuse/ relay later thanks for reply
Logged

05omegav6

  • Guest
Re: FAE cam sensor
« Reply #34 on: 13 November 2014, 15:50:00 »
That's it :y
Logged

smalt36

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • hull
  • Posts: 27
    • Omega2.2GLS
    • View Profile
Re: FAE cam sensor
« Reply #35 on: 13 November 2014, 20:01:56 »
Well can report my saga is over, thankyou Taxi Al, went to check the fuse you said, seems it had worked loose a bit, pulled it out very easily, pushed it back in and Bingo, started 1st click !! At least its got its new cam sensor which it had been asking for at lives to fight another day  :) :)
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39778
    • ML350 TDM SmartRoadster
    • View Profile
Re: FAE cam sensor
« Reply #36 on: 13 November 2014, 20:03:57 »
Quote from: smalt36 on 13 November 2014, 20:01:56
... and Bingo, started 1st click !! .....

 :y :y :y Result!
Logged

05omegav6

  • Guest
Re: FAE cam sensor
« Reply #37 on: 13 November 2014, 20:27:32 »
Glad to hear it :y
Logged
Pages: 1 2 [3]  All   Go Up
« previous next »
 

Page created in 0.015 seconds with 17 queries.