Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 [2] 3 4  All   Go Down

Author Topic: 53 2.2 petrol auto CD - not starting after head gasket change  (Read 8422 times)

0 Members and 2 Guests are viewing this topic.

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #15 on: 07 January 2015, 21:23:45 »
Just thinking.. What would happen if your were one revolution out on the crank  :-\
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #16 on: 07 January 2015, 21:38:43 »
I thought that too but checked and cyl 1 is tdc when all marks are where they should be.

even if it was, wouldn't it at least try to fire, albeit very roughly?
Logged

05omegav6

  • Guest
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #17 on: 07 January 2015, 22:08:55 »
Any access to a code reader :-\
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #18 on: 07 January 2015, 23:42:14 »
A mate can borrow a Launch x431.  Hopefully get it from him at weekend. I'm going to try some other tests in the meantime.  Also got another cam sensor coming, just in case.

I'll update on progress.

Logged

4x4

  • Guest
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #19 on: 08 January 2015, 06:13:00 »
Just a thought,you have put cams back in the correct sides?
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #20 on: 08 January 2015, 15:53:12 »
ok folks.

I now know why it's not starting, but am at a complete loss on how to proceed.  There is no compression!  25psi on cyl1, 0 on the rest.

The cam buckets are all out again and feel very stiff, even though I primed them in warm oil before putting them back in during rebuild. 

Any thoughts?
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #21 on: 08 January 2015, 16:08:45 »
Quote from: BIGtime on 07 January 2015, 21:23:45
Just thinking.. What would happen if your were one revolution out on the crank  :-\

Nothing, would work perfectly well.
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #22 on: 08 January 2015, 16:16:04 »
going to borrow another compression tester, just in case
Logged

4x4

  • Guest
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #23 on: 08 January 2015, 16:43:40 »
Something is out,i.e wrong cams on wrong side of head,which is where i would start 1st.
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #24 on: 08 January 2015, 20:37:23 »
right.

mate and I had a look again tonight and tested by filling cyl 1 with air from my compressor.  Air could be heard leaking out but we couldn't find where from.

stripped the head off again.  all valves seated nicely.  surfaces of head and block checked with straight edge - all ok.  the gasket looked fine, the only thing being it was a cheapo from flebay.

so - new (better) gasket and bolts tomorrow and will be checking compression before proceeding with anything else!

I'll update on progress.
Logged

4x4

  • Guest
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #25 on: 08 January 2015, 20:52:35 »
Just take your time when refitting everything and make sure you follow correct sequence for tightening head down. :y
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #26 on: 08 January 2015, 22:29:00 »
will do  ;)
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #27 on: 09 January 2015, 16:48:38 »
might be about to send the mega to the tip.    :'(

new gasket and bolts bought this morning.  spent rest of day rebuilding and when tried to start - nothing, just cranking away but not firing again.   

timing checked and all ok.

compression test shows ZERO.

anybody know what else would cause this?

the rest of the car is near perfect too, I've spent a lot of time and money keeping it ship shape.
 
Logged

4x4

  • Guest
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #28 on: 09 January 2015, 17:56:34 »
Can you take pics of cams and crank at correct timing position to start with. :y
Logged

effinomega

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Lanarkshire
  • Posts: 42
    • 2.2 CD Auto
    • View Profile
Re: 53 2.2 petrol auto CD - not starting after head gasket change
« Reply #29 on: 09 January 2015, 18:39:37 »
sure, will do tomorrow
Logged
Pages: 1 [2] 3 4  All   Go Up
« previous next »
 

Page created in 0.015 seconds with 17 queries.