Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1] 2  All   Go Down

Author Topic: F/L Door Swap  (Read 2589 times)

0 Members and 1 Guest are viewing this topic.

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
F/L Door Swap
« on: 22 January 2015, 18:19:50 »
Does this sound about right.  :y

1. Open bonnet and SLACKEN earth strap bolts but do NOT remove earth strap
2. Ignition ON / ignition off
3. Remove earth strap within 30 secs
4. Have a brew  Why
5.Remove the red clip in the electrical socket between the door and door pillar and twist the ring on the connector which should release the loom.
6.undo the door strap
7.remove the top and bottom door hinge pins With the Tool in link below, but have someone holding the door oh and its bloody heavy

http://www.ebay.co.uk/itm/NEW-Sealey-Door-Hinge-Pin-Extractor-Tool-Set-4pc-VS801-/110796733466?pt=UK_Hand_Tools_Equipment&hash=item19cbfffc1a
Logged

05omegav6

  • Guest
Re: F/L Door Swap
« Reply #1 on: 22 January 2015, 18:23:51 »
For a front door that's about it... :y

Don't need the tool, just a stout set of pliers and a steady hand with a hammer... Pliers used from the side, held tight and tapped in the appropriate direction with the hammer :y
Logged

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: F/L Door Swap
« Reply #2 on: 22 January 2015, 18:38:31 »
Quote from: Taxi Al on 22 January 2015, 18:23:51
For a front door that's about it... :y

Don't need the tool, just a stout set of pliers and a steady hand with a hammer... Pliers used from the side, held tight and tapped in the appropriate direction with the hammer :y
Is rear different then Al  :y
Logged

terry paget

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Midsomer Norton Somerset
  • Posts: 4633
    • 3 Astras 2 Vectra
    • View Profile
Re: F/L Door Swap
« Reply #3 on: 22 January 2015, 18:39:24 »
Sealey tool no help on Omega doors, as it tend to spread the hinge pin and make it stick. Omega hinge pins have a useful shoulder at one end, so you can get a pair if pliers or a small spanner under it and hammer it off, as Al says.
Logged

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: F/L Door Swap
« Reply #4 on: 22 January 2015, 18:46:06 »
Well thats £17 off the job  ;D ;D :y
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: F/L Door Swap
« Reply #5 on: 22 January 2015, 18:48:22 »
Quote from: BIGtime on 22 January 2015, 18:38:31
Quote from: Taxi Al on 22 January 2015, 18:23:51
For a front door that's about it... :y

Don't need the tool, just a stout set of pliers and a steady hand with a hammer... Pliers used from the side, held tight and tapped in the appropriate direction with the hammer :y
Is rear different then Al  :y
A doddle ;)
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: F/L Door Swap
« Reply #6 on: 22 January 2015, 18:56:47 »
Quote from: RobG on 22 January 2015, 18:48:22
Quote from: BIGtime on 22 January 2015, 18:38:31
Quote from: Taxi Al on 22 January 2015, 18:23:51
For a front door that's about it... :y

Don't need the tool, just a stout set of pliers and a steady hand with a hammer... Pliers used from the side, held tight and tapped in the appropriate direction with the hammer :y
Is rear different then Al  :y
A doddle ;)
Bet you have done loads a Rob  :y
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: F/L Door Swap
« Reply #7 on: 22 January 2015, 18:58:35 »
Quote from: BIGtime on 22 January 2015, 18:56:47
Quote from: RobG on 22 January 2015, 18:48:22
Quote from: BIGtime on 22 January 2015, 18:38:31
Quote from: Taxi Al on 22 January 2015, 18:23:51
For a front door that's about it... :y

Don't need the tool, just a stout set of pliers and a steady hand with a hammer... Pliers used from the side, held tight and tapped in the appropriate direction with the hammer :y
Is rear different then Al  :y
A doddle ;)
Bet you have done loads a Rob  :y
Fronts & rears single-handed Steve
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

05omegav6

  • Guest
Re: F/L Door Swap
« Reply #8 on: 22 January 2015, 19:31:43 »
Rears... open window, open door, unplug loom (plug in b pillar), close door, open front door, sit on edge of seat and knock the rear door pins out, stand up, support the rear door through the open window with one hand, pull door handle with tother hand and lift the door away :y

Takes as long to do as this did to type ;D
Logged

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: F/L Door Swap
« Reply #9 on: 06 February 2015, 21:24:01 »
Quote from: BIGtime on 22 January 2015, 18:19:50
Does this sound about right.  :y

1. Open bonnet and SLACKEN earth strap bolts but do NOT remove earth strap
2. Ignition ON / ignition off
3. Remove earth strap within 30 secs
4. Have a brew  Why
5.Remove the red clip in the electrical socket between the door and door pillar and twist the ring on the connector which should release the loom.
6.undo the door strap
7.remove the top and bottom door hinge pins With the Tool in link below, but have someone holding the door oh and its bloody heavy

http://www.ebay.co.uk/itm/NEW-Sealey-Door-Hinge-Pin-Extractor-Tool-Set-4pc-VS801-/110796733466?pt=UK_Hand_Tools_Equipment&hash=item19cbfffc1a
Why do you need to wait after pulling batt power  :-\
Logged

05omegav6

  • Guest
Re: F/L Door Swap
« Reply #10 on: 06 February 2015, 21:27:06 »
To give the airbag circuits chance to naturally discharge :y

The side airbag triggers are in the doors...
Logged

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: F/L Door Swap
« Reply #11 on: 06 February 2015, 21:29:42 »
Quote from: Taxi Al on 06 February 2015, 21:27:06
To give the airbag circuits chance to naturally discharge :y

The side airbag triggers are in the doors...
right i see,,so 10 mins does the job Al  :y
Logged

omegod

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • liverpool
  • Posts: 4348
    • 2017 Seat Ateca
    • View Profile
Re: F/L Door Swap
« Reply #12 on: 06 February 2015, 21:55:48 »
And on no account turn on the ignition whilst loom is disconnected :-[  ;D if you forget to disconnect the battery
Logged
Happy to do Omega servicing etc around Merseyside,cruise activation, airbag lights sorted too...

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: F/L Door Swap
« Reply #13 on: 06 February 2015, 22:14:54 »
Quote from: omegod on 06 February 2015, 21:55:48
And on no account turn on the ignition whilst loom is disconnected :-[  ;D if you forget to disconnect the battery
ok i will remember that lot.... :y i get the picture... any body ever set one off. ;D ;D ;D
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39728
    • ML350 TDM SmartRoadster
    • View Profile
Re: F/L Door Swap
« Reply #14 on: 06 February 2015, 22:43:49 »
Quote from: BIGtime on 06 February 2015, 22:14:54
Quote from: omegod on 06 February 2015, 21:55:48
And on no account turn on the ignition whilst loom is disconnected :-[  ;D if you forget to disconnect the battery
ok i will remember that lot.... :y i get the picture... any body ever set one off. ;D ;D ;D

It's to do with the air bag light staying on ...... not triggering the actual air bag  ;)
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.013 seconds with 17 queries.