Topic: Further ABS fault (Read 3017 times)

TheBoy · « **Reply #15 on:** 16 June 2025, 17:28:27 »

Early petrol V6 have 2 wire brake switch if non-cruise, or 4 wire if fitted with cruise

countrywoman · « **Reply #16 on:** 16 June 2025, 17:43:19 »

Yes thats what I thought, I checked wiring dia and it just feeds ABS from same wire as feed to brake lights. I checked for continuity and that was fine. More head scratching then.

countrywoman · « **Reply #17 on:** 17 June 2025, 16:58:43 »

It was the under dash tray pushing the switch up, bit more panel cutting then!!!

countrywoman · « **Reply #18 on:** **Yesterday** at 14:09:48 »

Okay ,found pedal a bit hit and mis turning switch off. Stuck a bit of rubber to the pedal and see how that goes, now it says ECU fault. Only comes on after driving a good few hundred yards, speedo is out showing 25 at 30. Makes me wonder if tyre size is out? But the 235/45/17 is the same radius on tyre chart. Does the speedo work of rear tyres/abs sensor?

countrywoman · « **Reply #19 on:** **Today** at 08:48:42 »

Are all the drive shaft inner joints the same number of teeth on reluctor ring? just a thought as used 2L shafts , it would explain why speedo is out?

News:

Author Topic: Further ABS fault (Read 3017 times)

TheBoy

Re: Further ABS fault

countrywoman

Re: Further ABS fault

countrywoman

Re: Further ABS fault

countrywoman

Re: Further ABS fault

countrywoman

Re: Further ABS fault