Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Wanted - 3.0L lower divider  (Read 1501 times)

0 Members and 2 Guests are viewing this topic.

Teejay

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 4
    • View Profile
Wanted - 3.0L lower divider
« on: 02 February 2011, 21:11:34 »
Hi all, I'm looking to carry out a Z32SE transplant and am looking for the lower inlet plenum to replace the restrictive one in the 3.2. - Anyone help?
Cheers
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24523
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #1 on: 02 February 2011, 21:14:55 »
[movedhere] Test Zone [move by] Jimbob.
Logged

sjc

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Alloa, Scotland
  • Posts: 730
    • Ultra-dull Audi TDi
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #2 on: 02 February 2011, 21:47:16 »
I've got a bored out and matched set (alloy and plastic sections) that were originally from a 2.5 but are now at least equivelant to size of the 3.0 ones.  Complete with fuel rail and cleaned injectors.

All done professionally and shining like new!

Asking £60 + postage for whole lot, can provide pictures.
Logged
If you Elite an MV6, does that make it an MVee-leet?

Teejay

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 4
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #3 on: 03 February 2011, 20:52:18 »
Pics would be great if poss.
What engine has the inlet and FR come from? - c25xe/x25xe?
Does that include the inlet manifold
Cheers
Logged

sjc

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Alloa, Scotland
  • Posts: 730
    • Ultra-dull Audi TDi
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #4 on: 04 February 2011, 00:20:44 »
Quote
Pics would be great if poss.
What engine has the inlet and FR come from? - c25xe/x25xe?
Does that include the inlet manifold
Cheers
It's the runners and the divider from an X25XE.  Will post photos ASAP.
Logged
If you Elite an MV6, does that make it an MVee-leet?

sjc

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Alloa, Scotland
  • Posts: 730
    • Ultra-dull Audi TDi
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #5 on: 05 February 2011, 10:05:06 »
Photos as promised.  As you can see, the runners have been opened out and matched to the flange plate, also the injector port has been blended out...





« Last Edit: 05 February 2011, 10:10:21 by sjc »
Logged
If you Elite an MV6, does that make it an MVee-leet?

Teejay

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 4
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #6 on: 05 February 2011, 13:10:54 »
ah nutsacks - that set up won't fit unfortunately as it's for a Calibra where the inlet goes over the back (transverse)
« Last Edit: 05 February 2011, 13:12:41 by Teejay »
Logged

sjc

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Alloa, Scotland
  • Posts: 730
    • Ultra-dull Audi TDi
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #7 on: 05 February 2011, 13:31:48 »
You're gonna have to use the front wheel drive 2.5 inlet setup then because ALL of the Omega engines use this style.  Then you're gonna get fueling problems running a 3.2 ECU without the multi-ram gear that it will expect to be there.

I take it the Omega plenum and induction manifold would foul the bonnet?
Logged
If you Elite an MV6, does that make it an MVee-leet?

Teejay

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 4
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #8 on: 06 February 2011, 10:20:50 »
Yep, Omega inlet would foul the bonnet.
The engine I have is a Z32SE which is from a Vectra 'C' (I think the Omega 3.2 is Y32SE) so the set up will already be front wheel drive, that also means I don't have to swap the sump. I believe that I can use my current ECU from my X25XE.
The black lower divider will fit though and that's the bit I really need although some freshly cleaned injectors would have been nice. There is a place on eBay that will sell cleaned injectors on an exchange basis
Logged

sjc

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Alloa, Scotland
  • Posts: 730
    • Ultra-dull Audi TDi
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #9 on: 06 February 2011, 10:55:06 »
Just had a look on EPC and I'd say you should check very carefully that the Omega lower divider will fit (unless of course you're going on the advice of someone who has done it already) because that is a COMPLETELY different induction manifold.  I like how they've done the multi-ram though  ;)

Anyway, I'm not willing to split mine because they're matched, sorry.
Logged
If you Elite an MV6, does that make it an MVee-leet?

Teejay

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 4
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #10 on: 07 February 2011, 09:32:36 »
Fella that's doing the conversion used to work for the V6 plant so should be sound advice.
Fair enough on the divider, thanks anyway :)
Logged

Teejay

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 4
    • View Profile
Re: Wanted - 3.0L lower divider
« Reply #11 on: 19 February 2011, 15:12:29 »
bump
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.019 seconds with 17 queries.