Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: How hard is a 2.5TD headgasket change  (Read 1415 times)

0 Members and 1 Guest are viewing this topic.

JueV6

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Kent
  • Posts: 1464
    • View Profile
How hard is a 2.5TD headgasket change
« on: 21 September 2008, 19:06:14 »
Swmbo had just "Aquired" a Tractor with a dead headgasket,

Having never done a BMW Tractor, how hard is it?
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37573
    • Zafira Tourer & BMW 435i
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #1 on: 21 September 2008, 19:08:11 »
pig of a job.

I think!!! the sump needs to come off... cause of the chains.

HD failure would be rear, i suspect its more a cracked head...
« Last Edit: 21 September 2008, 19:08:27 by tunnie »
Logged

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #2 on: 21 September 2008, 20:11:04 »
TB is the man to ask, as the resident tractor owner

Having seen the one on his garage floor, I can confirm that the only real hard bit looks like the chain setup...
Logged

Omegatoy

  • Omega Baron
  • *****
  • Offline Offline
  • UK
  • Posts: 3688
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #3 on: 21 September 2008, 20:39:06 »
its not especially difficult, sump doesent need to come off. the top chain is locked by a pin and the bottom held by the other if you know what i mean, you need to ask TB nicely if you can borrow the special tool i made out of his garage door opener to push the tensioner back enough to put the locking pin in, :y setting up tdc is a must as is marking the cam pulley as they are friction fit and no markings on them so tippex is your friend here, thats after you have unbolted the injector pipes and got them out of the way of course!!

its more time consuming than difficult!! :y
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39778
    • ML350 TDM SmartRoadster
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #4 on: 21 September 2008, 20:45:20 »
Quote
... marking the cam pulley as they are friction fit and no markings on them  ......

What ever happened to keyed cam shafts & sprockets? My diseasal Astra is the same friction/taper fit - I just left well alone & marked up the belt (or that's what I did the second time around .... I found out after I'd taken the cam belt off, fortunately before I took the cam sprocket off though!)
Logged

unlucky alf

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • worksop, notts
  • Posts: 2394
  • this is some MOT advisory list!.
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #5 on: 21 September 2008, 20:53:07 »
the taper fit goes back as far as the mk2 cavalier diesels & i always used indelible markers for timing marks as tippex can chip off easily.
Logged

Omegatoy

  • Omega Baron
  • *****
  • Offline Offline
  • UK
  • Posts: 3688
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #6 on: 21 September 2008, 20:57:14 »
forgot to say you need to find out which hg you have to order one!!!
2 or 3 hole!!! you can see the one fitted but its difficult!!! :y
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39778
    • ML350 TDM SmartRoadster
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #7 on: 21 September 2008, 20:57:50 »
Quote
the taper fit goes back as far as the mk2 cavalier diesels & i always used indelible markers for timing marks as tippex can chip off easily.

It's a diesel thing then?  :-/
CIH engines from MkI Cavaliers through to Senator Bs had keyed cam shafts.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107031
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #8 on: 21 September 2008, 21:08:58 »
I have a TD crank/cam lock kit here.  Need to improvise on the tensioner, and no, you cannot use my garage door opener (as destroyed made by Omegatoy).

The head is 'kin heavy, and not the easiest due to bulkhead.

Logged
Grumpy old man

Omegatoy

  • Omega Baron
  • *****
  • Offline Offline
  • UK
  • Posts: 3688
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #9 on: 21 September 2008, 22:05:31 »
more to the point, are you sure its headgasket gone? and not the old favourite impeller fallen off???? :y
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107031
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: How hard is a 2.5TD headgasket change
« Reply #10 on: 21 September 2008, 22:13:06 »
Yes, worth posting the symptoms up...
Logged
Grumpy old man
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.