Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: Starter Motor fried on 2.5 TD Help...  (Read 1635 times)

0 Members and 1 Guest are viewing this topic.

Psychoca

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Female
  • Norfolk
  • Posts: 776
    • Beaten up Mondeo TDCI ST.
    • View Profile
Starter Motor fried on 2.5 TD Help...
« on: 06 October 2008, 17:30:01 »
Could anyone tell me on how to change the starter on my 2.5 TD (BMW version), the only way I can see is to remove the inlet manifold...

Thanks.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106849
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #1 on: 06 October 2008, 18:52:35 »
Quote
Could anyone tell me on how to change the starter on my 2.5 TD (BMW version), the only way I can see is to remove the inlet manifold...

Thanks.
yup, thats correct.

Really easy job on tractor:

Remove engine plastics/viscous fan/intake.

Remove 4 wires from back of starter (after disconnecting battery, obviously

2 nuts and bolts hold starter on.



And yes, I have done it loads of times.  Even keep a spare in garage ::)
Logged
Grumpy old man

Omegatoy

  • Omega Baron
  • *****
  • Offline Offline
  • UK
  • Posts: 3688
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #2 on: 06 October 2008, 20:06:06 »
swapped one from underneath and didnt disconnect battery!!!! its tight but you have to be gentle and careful but i had a skinny blole who could fit his arm down beside the inlet to put the top starter nut back on, was rather pleased i did it ths way!!! :y
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106849
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #3 on: 06 October 2008, 20:30:07 »
Quote
swapped one from underneath and didnt disconnect battery!!!! its tight but you have to be gentle and careful but i had a skinny blole who could fit his arm down beside the inlet to put the top starter nut back on, was rather pleased i did it ths way!!! :y
A pig on an auto though....

Much, much, much, much, million times much easier to do it from top.
Logged
Grumpy old man

Omegatoy

  • Omega Baron
  • *****
  • Offline Offline
  • UK
  • Posts: 3688
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #4 on: 06 October 2008, 21:28:04 »
Quote
Quote
swapped one from underneath and didnt disconnect battery!!!! its tight but you have to be gentle and careful but i had a skinny blole who could fit his arm down beside the inlet to put the top starter nut back on, was rather pleased i did it ths way!!! :y
A pig on an auto though....

Much, much, much, much, million times much easier to do it from top.
it  was on an auto!!! mrs omegatoys first one!!!! :-X
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106849
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #5 on: 06 October 2008, 21:35:54 »
Quote
Quote
Quote
swapped one from underneath and didnt disconnect battery!!!! its tight but you have to be gentle and careful but i had a skinny blole who could fit his arm down beside the inlet to put the top starter nut back on, was rather pleased i did it ths way!!! :y
A pig on an auto though....

Much, much, much, much, million times much easier to do it from top.
it  was on an auto!!! mrs omegatoys first one!!!! :-X
Idiot ;D

Why didn't you go from the top?  You know its piss easy then ;)


Talking of piss and intakes off, Mr Omegatoy, I may be after getting your hands dirty ::) - as discussed Friday down pub, I appear to be pissing diesel all over the M40  :-X
Logged
Grumpy old man

unlucky alf

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • worksop, notts
  • Posts: 2394
  • this is some MOT advisory list!.
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #6 on: 06 October 2008, 21:41:49 »
ive taken mine off from underneath umpteen times [for obvious reasons],when re-fitting word of advice for the top nut holding the starter in, either get a thin walled plain nut [not locking] & run that up the bolt first & tighten, this allows you to put the locking nut on without having to hold the bolt with a spanner as its a sod to get to, or you can grind off the locking part of the nut so it runs freely up the bolt & do it up tight with a socket & to hell with the locker ;), you could put a spring washer on first if you have one which would help keep it tight, but i didnt so i didnt ;),,,good luck :y
Logged

unlucky alf

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • worksop, notts
  • Posts: 2394
  • this is some MOT advisory list!.
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #7 on: 06 October 2008, 21:46:58 »
PSYCHOCA, where are you based as it dont say on your profile??
Logged

Psychoca

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Female
  • Norfolk
  • Posts: 776
    • Beaten up Mondeo TDCI ST.
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #8 on: 06 October 2008, 22:26:23 »
Thank you all,  I had a mate reckon it would be better to do it from underneath, it took about 2 hours to get the F***ing thing off...  So when I put it back on, I'll be removing the manifold...


Thanks again to you all...
Logged

Omegatoy

  • Omega Baron
  • *****
  • Offline Offline
  • UK
  • Posts: 3688
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #9 on: 06 October 2008, 22:27:21 »
Quote
Quote
Quote
Quote
swapped one from underneath and didnt disconnect battery!!!! its tight but you have to be gentle and careful but i had a skinny blole who could fit his arm down beside the inlet to put the top starter nut back on, was rather pleased i did it ths way!!! :y
A pig on an auto though....

Much, much, much, much, million times much easier to do it from top.
it  was on an auto!!! mrs omegatoys first one!!!! :-X
Idiot ;D

Why didn't you go from the top?  You know its piss easy then ;)


Talking of piss and intakes off, Mr Omegatoy, I may be after getting your hands dirty ::) - as discussed Friday down pub, I appear to be pissing diesel all over the M40  :-X

cos i hate taking the inlet off when i dont have to!!!! :y got to go to bicester sometime this week you "working" from home anytime this week??? :y
Logged

osealy

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • dublin
  • Posts: 412
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #10 on: 06 October 2008, 22:31:54 »
The Good Honest A/T guy who changed my tranny after i drove thru a flood when the breather had fallen off. Water inthe atf , reverse was the first to go. He def did it from underneath. The last time I changed the glow plugs I could not bully the manifold off. Had to resort to dexterity.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106849
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #11 on: 06 October 2008, 22:40:20 »
Quote
Quote
Quote
Quote
Quote
swapped one from underneath and didnt disconnect battery!!!! its tight but you have to be gentle and careful but i had a skinny blole who could fit his arm down beside the inlet to put the top starter nut back on, was rather pleased i did it ths way!!! :y
A pig on an auto though....

Much, much, much, much, million times much easier to do it from top.
it  was on an auto!!! mrs omegatoys first one!!!! :-X
Idiot ;D

Why didn't you go from the top?  You know its piss easy then ;)


Talking of piss and intakes off, Mr Omegatoy, I may be after getting your hands dirty ::) - as discussed Friday down pub, I appear to be pissing diesel all over the M40  :-X

cos i hate taking the inlet off when i dont have to!!!! :y got to go to bicester sometime this week you "working" from home anytime this week??? :y
The inlet is 10 mins max, if you dont have a stupid viscous on ;)
Logged
Grumpy old man

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106849
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #12 on: 06 October 2008, 22:40:58 »
I can take a day off if we have a few days notice...
Logged
Grumpy old man

Omegatoy

  • Omega Baron
  • *****
  • Offline Offline
  • UK
  • Posts: 3688
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #13 on: 06 October 2008, 23:21:17 »
ok poss looking at thursday, if not it will have to be next week as rest of this week is sorting out the track slag ready for the wonders of Marham this sunday!!! :y
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 106849
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Starter Motor fried on 2.5 TD Help...
« Reply #14 on: 07 October 2008, 19:03:56 »
Quote
ok poss looking at thursday, if not it will have to be next week as rest of this week is sorting out the track slag ready for the wonders of Marham this sunday!!! :y
I'll drop you a text. Still on same number as last year?
Logged
Grumpy old man
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.016 seconds with 17 queries.