Topic: still on the gearbox!!!! (Read 547 times)

tnyquigs · « **on:** 03 December 2011, 18:41:43 »

Got hold of a second hand AR35 and changed the bell housing. As I did, I noticed the replacement box had no thrust bearing ring just grooves where it used to be. I have put the thrust bearing and first section of the transmission gear from my old box into the replacement box. The question - is the transmission gear the same in the AR25 ast the AR35. they appeared to be identical. Any gearbox specialists out there?

ngrainqey · « **Reply #1 on:** 04 December 2011, 17:25:24 »

AFAIK the two gearboxes are identical on the outside, it's the internals that are stronger/different shift solenoids etc that differ between the two 'boxes, i've had them stood next to eachother ages back now and there were no noticable differences
HTH

tnyquigs · « **Reply #2 on:** 05 December 2011, 22:09:35 »

Good news, changing 4th gear did not create a problem and the thrust bearing is working. It appears some of the bits are interchangeable.http://images.omegaowners.com/forum/smf2000/Smileys/oofstd/thumbsup.gif
She is back on the road and running well. keep your fingers crossed.

News:

Author Topic: still on the gearbox!!!! (Read 547 times)

tnyquigs

still on the gearbox!!!!

ngrainqey

Re: still on the gearbox!!!!

tnyquigs

Re: still on the gearbox!!!!