1
Omega General Help / Re: fault code 74
« on: 02 August 2011, 18:46:50 »
ok thanks will get the crank sensor changed asap just thought 19 was listed because the engine wasnt running. there is no light on when engine is running.
- 07 December 2025, 08:02:54
- Welcome, Guest
News:
Welcome to OOF
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega General Help / fault code 74
« on: 01 August 2011, 22:14:50 »
hi i have just done a paper clip test the only faults i get are 19 and 74 which says > Mass Air Flow Sensor Voltage High. what does this mean and will it affect the way the car would run. as it runs fine just wondering what it would do thanks in advance rick.
3
Omega General Help / general wondering
« on: 18 June 2011, 17:30:44 »
hi my omega has started to wander where ever it wants i have had the tracking done which made it better but u are still fighting with it all the time. i have been under the car with a large screw driver and noticed u car move the rubber bush at the front on the lower arm very easy. my question is how much movement should there be? thanks rick.
4
Omega General Help / Re: Omega MV6 - Need help identifying pipe in engine
« on: 04 June 2011, 10:45:37 »
on my old elite one of my cats had blocked which caused back pressure that melted the rubber pipe. i changed the rubber pipe for a new one which lasted 2 mins. only way i found out it was cat was to disconnect middle boxes from where they connnect to cat you could feel a big difference in the air flow coming out which tells u which one had gone might not be same but thats what i did.
5
Omega General Help / Re: Locking kit loan
« on: 21 May 2011, 15:32:58 »
when i bought a cambelt kit from autovaux they did a loan service dont no if thats of any help. think was about £15 for a week. but was couple of years ago.
6
Omega General Help / Re: mv6 exhaust problem
« on: 20 May 2011, 12:51:25 »
i have had this problem on a old 2.5 i had one of the cats had blocked so it put the hot gases back into the rubber pipes and kept blowing them up. took exhaust off and loads of little bits fell out.
7
Omega General Help / Re: Cruise Con
« on: 26 April 2011, 20:04:05 »
Its auto mate. Will try vauxhall by mine tomorrow.
8
Omega General Help / Re: Cruise Con
« on: 26 April 2011, 18:53:12 »
Thanks very much for all your help. Does anyone know of anyone who has one of these switches for sale. Thanks Rick.
9
Omega General Help / Cruise Con
« on: 26 April 2011, 11:49:48 »
Hya all. Fitted cruise con indicator stalk and actuator box in engine bay and cruise con dosnt work. Do I need a seprate brake pedal switch for this. I have a facelift estate and the cruise con came off old shape elite both the same age. Thanks Rick.
10
Omega General Help / Re: gearbox filler bolt
« on: 17 April 2011, 19:31:54 »
thanks wil try the filling option next weekend if that dont work guess its sump off job. thanks rick. 
11
Omega General Help / gearbox filler bolt
« on: 17 April 2011, 12:17:19 »
hi just replaced engine in my car. upon assembly i had a leaky gearbox pipe that i have now fixed. the bold that u undo to topup box is rounded to hell. does anybody know a tool i can buy that will fit in the confined space. thanks rick.
12
Omega General Help / autogearbox leak
« on: 11 April 2011, 16:41:10 »
hi ive just replaced engine which involved taking out the radiator everythink went good apart from the gearbox leaking where the 2 rubber pipes join over the metal pipe on inside of main rad. i have trimmed pipes a little shorter because ends looked mangled and used jubilee clips to hold pipes tight but the top pipe is still leaking. does any bodu know how to stop this leak as i cant drive it the way it is as loosing way 2 much oil. thanks in advance. 
13
Omega General Help / omega estate
« on: 04 April 2011, 11:02:51 »
hi just bought a nother engine for my car. my question is would the new engine fit in back of estate to get it home. plus would it be to heavy to legally carry .thanks rick.
14
Omega General Help / autogearbox fault
« on: 29 March 2011, 22:40:41 »
hi i have just done my heater matrix whilst putting gearselector cover back on i trapped a couple of wires under selector fork 
. car was ok for couple of hours then today gearbox check came up on mid. it is driving in safe mode and the little lights next to p r n d doesnt light up. the brown wire was very crimped but not cut. could this have broken inside and caused these faults. thanks rick.
. car was ok for couple of hours then today gearbox check came up on mid. it is driving in safe mode and the little lights next to p r n d doesnt light up. the brown wire was very crimped but not cut. could this have broken inside and caused these faults. thanks rick.
15
Omega General Help / ticking?
« on: 27 March 2011, 15:18:43 »
hi this is probably a silly question but if the little copper looking pipe that comes off drivers side exhaust maniford was loose at the base would this cause the engine to sound like a hydraulic tick. sorry for silly question but am stumped in finding this ticking noise.