Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[albitz]

They're three pin and mine are 4 pin.  Diameter is smaller too, so I've opened out the holes in the bumper to take my existing ones and will have to source one new(?) one.
http://www.omegaowners.com/forum/YaBB.pl?num=1308645882

PM incoming Chris.

[Darth Loo-knee]

Renewed the Cambelt, Idlers, Tensioner, Water Pump, Anti-Freeze, Auxbelts, Spark Plugs, Oil & Filter, Fuel Filter & Fuel Pump on my Scoob, ready for my Live Remap 

[albitz]

What they like to work on Daz ? :-/
I reckon that fuel pump will be getting worked pretty hard after the remap.

[Darth Loo-knee]

What they like to work on Daz ? :-/

Ok mate

[albitz]

I thought the boxer configuration might be a tad awkward ? :-/

[Darth Loo-knee]

I thought the boxer configuration might be a tad awkward ? :-/

When a few things have been removed not to bad really
Are you getting one Albs?

[henryd]

I thought the boxer configuration might be a tad awkward ? :-/

I thought the same till I did one a while ago,with the rad out its actually quite nice to do

[Darth Loo-knee]

I thought the boxer configuration might be a tad awkward ? :-/

I thought the same till I did one a while ago,with the rad out its actually quite nice to do

So it is
Head Removal maybe charater building 

[albitz]

I thought the boxer configuration might be a tad awkward ? :-/

When a few things have been removed not to bad really
Are you getting one Albs?

I wish.

[henryd]

I thought the boxer configuration might be a tad awkward ? :-/

I thought the same till I did one a while ago,with the rad out its actually quite nice to do

So it is
Head Removal maybe charater building 

Aye, I reckon your right,changing the plugs is as much of a job as the cambelt by the time access is gained

[Darth Loo-knee]

I thought the boxer configuration might be a tad awkward ? :-/

I thought the same till I did one a while ago,with the rad out its actually quite nice to do

So it is
Head Removal maybe charater building 

Aye, I reckon your right,changing the plugs is as much of a job as the cambelt by the time access is gained

I have just added those to my above little list as you reminded me
Gonna get so Magncore Leads for it then tahts it for a bit 

[henryd]

I thought the boxer configuration might be a tad awkward ? :-/

I thought the same till I did one a while ago,with the rad out its actually quite nice to do

So it is
Head Removal maybe charater building 

Aye, I reckon your right,changing the plugs is as much of a job as the cambelt by the time access is gained

I have just added those to my above little list as you reminded me
Gonna get so Magncore Leads for it then tahts it for a bit 

 :-/ The one I did had seperate coils for each plug and no leads(95 gravel express complete with roo bars )

[Darth Loo-knee]

I thought the boxer configuration might be a tad awkward ? :-/

I thought the same till I did one a while ago,with the rad out its actually quite nice to do

So it is
Head Removal maybe charater building 

Aye, I reckon your right,changing the plugs is as much of a job as the cambelt by the time access is gained

I have just added those to my above little list as you reminded me
Gonna get so Magncore Leads for it then tahts it for a bit 

 :-/ The one I did had seperate coils for each plug and no leads(95 gravel express complete with roo bars )

Mine has a coil pack on top of the inlet manifold and leads

[TheDaddy]

Completed cleaning out the rear brakes and adjusting the handbrake.
Think I have a sticky piston on the rear drivers....Will have to take it off and try to sort.

Overall though the brakes are a lot better since the new front pads and oil.

[RolandL]

This evening I  'ave mostly been putting back a repaired ABS ecu. 

aint life grand.  5 hrs to remove the flippin thing and less than an hour to put it back. 

No more magic miles tho 

PS can highly reccomend BBA-reman, very quick turnaround and excellant customer service.